ive decided to tune and stay in open loop after tuning, problem is i dont know which settings to modify to make sure closed loop is never enabled.

I know I need to set the temperature to some way off high number like 999*C, but there are three different closed loop temp settings that can be adjusted and I need to know which ones to change to ENSURE closed loop stays non-active

Loop Closed Enable Hot Temp. Threshold
Loop Closed Enable Min. Temp
Loop Closed Timer Cold Temp. Threshold

I have already changed the "Loop Closed Enable Min. Temp" to 999*C, do i need to change the other two as well, and is this all that needs to be done to ensure closed loop is never enabled?

thanks

 

you should be fine with what you have done.

 

what two wires are ya closing the maf sensor what colors i got four wires and dont know witch two to jump so its closed

 

?

 

A little off base we are talking about prom tuning not re-wiring

 

Originally Posted by rhead007
what two wires are ya closing the maf sensor what colors i got four wires and dont know witch two to jump so its closed

sometimee i tipe wit my face two butt it dont werk out two gud.


Loop Closed Enable Hot Temp. Threshold
Loop Closed Enable Min. Temp
Loop Closed Timer Cold Temp. Threshold

Exactly what i would have suggested to you.

 

so you can only do this with the prom i cant jump wires to temerarly till i get one