I use to read my codes using paper clip method #6 and #12 are the correct pins? I try to read it but it wont flash SES light just stays ON how do I fix it?

 

Pins A & B on the ALDL connector. Usually the two on the upper right.

RBob.

 

Thanks something I have done 50x before and forgot.

 

Hello
Is there anyone here who might want to sell their ALDL adapter (12 Pin ALDL OBD1 Bluetooth and USB Scanner)?
I'm looking for one, but I can't find one for sale anywhere.
That would be very helpful.
Thank you very much.

 

Red devil River seems to be hit or miss on quality, 1320 quit selling their blue tooth model. Moates.net has the xtreme aldl / cable 1 for a usb connection.

 

Thank you very much.
I found the Red Devil River site last night.
Any idea what this pink cable shown in the picture is for? (https://reddevilriver.com/home-page/...IN-LDL1-USB-MD)

Thanks for the other link. (Moates.net)
I'll take a look around right away.

Thanks

 

Pink wire gets inserted to the aldl to power the usb/ Bluetooth device

 

I looked at that website, and it is a simple device and lacking for OBD1 full scanner
If wanting one that works on a MS Windows laptop that has a free USB port
It scans, records, replays, has charting and gauges modes, check for tripped DTCs, etc
Can do very long testruns in record mode to be able to catch random problems

Go to http://www.tunercat.com/
They have been around for decades, and this scanner has been around for years.
On the left side of main webpage, select "Datacat"
Then halfway down that page is select which cable to come with the scanner software
In your case the ADLC would be 12 pins so select the -1 cable, $135 for the cable, interface and scanner software