Just wondering what is considered high coolant temp for this table in TunerCAT. This is for an $8D def file. I'm getting ready to do some more burns after messing around with PE a bit and was curious of this. I'm keeping the threshold pretty low at 15% TPS from 1200 rpm on up which definitely makes sense at high coolant temps but I want to make sure what the computer is actually saying is a high temp.

Thanks

 

From the 8D hack

L8602: FCB 209 ; USE TBL L8608 IF COOL = or GT (116c), (244F)

To know for sure what yours is check the location right before the normal table for your bin. Normal coolant scaling applies.

HTH

John