maf tables
#1
Member
Thread Starter
Join Date: May 2003
Location: Easton, MA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 355
Transmission: 700 r4
maf tables
using tunerpro version 3.07
bin = arap
ecu file = 6Ev011
The maf table 1 scalar is 17
The maf table 1 is set to show calculated values.
The value of 1.46 volts in gm/sec is 22.27.
How is this possible? When i set the maf table to show hex values i get f8, or 248 in the 1.46 volt row. 248 times 17 divided by 256 is 16.468.
Shouldn't 16.468 be the calculated value?
bin = arap
ecu file = 6Ev011
The maf table 1 scalar is 17
The maf table 1 is set to show calculated values.
The value of 1.46 volts in gm/sec is 22.27.
How is this possible? When i set the maf table to show hex values i get f8, or 248 in the 1.46 volt row. 248 times 17 divided by 256 is 16.468.
Shouldn't 16.468 be the calculated value?
#2
Member
Thread Starter
Join Date: May 2003
Location: Easton, MA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 355
Transmission: 700 r4
aw crap im retarded the sclar value of 17 is in hex, and i just found a post i made a while ago about the same thing, sorry for clogging up the forums with my stupidity.
Thread
Thread Starter
Forum
Replies
Last Post
BumpaD82
Tech / General Engine
37
02-26-2016 02:57 PM