So what do i need to start burnning my own chips? How much will it cost to get started?
What parameters can you set up with a custom chip? spark/fuel? injector pulse? And how do you know how to set the parameters up interms of installing larger intake and cam then how much timming and fuel to program to the new chip....etc.. Any info would be greatly appriciated!
What parameters can you set up with a custom chip? spark/fuel? injector pulse? And how do you know how to set the parameters up interms of installing larger intake and cam then how much timming and fuel to program to the new chip....etc.. Any info would be greatly appriciated!
TGO Supporter
Just click on Traxion's "Prom Burning Introduction" link on the top of this very message. It is the underlined part.
It has all the answers to the questions you are asking, plus much more.
It has all the answers to the questions you are asking, plus much more.
Supreme Member
Read my article linked at the top of the page.
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's with bigger cam, bigger stall, and bigger exhaust.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's with bigger cam, bigger stall, and bigger exhaust.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org