got new flash PROMs; need a FF.bin
Thread Starter
Member
Joined: Jul 2000
Posts: 402
Likes: 0
From: SoCal
got new flash PROMs; need a FF.bin
I have several flash PROMs but after some reading about them it appears that I need a FF.bin to blank the first part of the chip. Can someone e-mail me a FF.bin? or how can I make one? or where do I get one?
jfearn@socal.rr.com
Thanks,
James
------------------
1985 Z-28 305 TPI
165 ECM,STB,SFC,GW "wonderbar"
jfearn@socal.rr.com
Thanks,
James
------------------
1985 Z-28 305 TPI
165 ECM,STB,SFC,GW "wonderbar"
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Try this at a dos prompt, in your .bin directory:
copy yourbin.bin + yourbin.bin newbin.bin /b
That takes your 16k bin and doubles it, making it a 32k bin. Basically you have your bin in both the upper 16k and the lower 16k of the 32k flash prom. Make sense?
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.23 @ 107.62 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
copy yourbin.bin + yourbin.bin newbin.bin /b
That takes your 16k bin and doubles it, making it a 32k bin. Basically you have your bin in both the upper 16k and the lower 16k of the 32k flash prom. Make sense?
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.23 @ 107.62 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
Thread
Thread Starter
Forum
Replies
Last Post
