$32b cylinder select hex
Thread Starter
Supreme Member
iTrader: (2)
Joined: May 2007
Posts: 2,574
Likes: 0
From: right behind you
Car: '85 maro
Engine: In the works...
Transmission: TH700 R4
Axle/Gears: 3.73 posi
$32b cylinder select hex
Can anyone with tunercat tell me what the hex value for 6 cylinders is in $32b? I have tunerpro.
Member
Joined: Sep 2006
Posts: 118
Likes: 0
From: Uxbridge, MA
Car: 2010 Camaro 2SS, 1994 Chevy Blazer
Engine: 6.2L, 355TBI
Transmission: 700R4
Axle/Gears: 3.42 posi, 3.73
Re: $32b cylinder select hex
Hi,
I copied this directly from the xdf file "Number of Cylinders $00=8 $C0=6 $80=4" Is is what you want to know? It is in address "09" BTW. In case it is not listed in your program you could just modify the definition to include it.
Randy
I copied this directly from the xdf file "Number of Cylinders $00=8 $C0=6 $80=4" Is is what you want to know? It is in address "09" BTW. In case it is not listed in your program you could just modify the definition to include it.
Randy
Member
Joined: Sep 2006
Posts: 118
Likes: 0
From: Uxbridge, MA
Car: 2010 Camaro 2SS, 1994 Chevy Blazer
Engine: 6.2L, 355TBI
Transmission: 700R4
Axle/Gears: 3.42 posi, 3.73
Re: $32b cylinder select hex
I know I used a modified 32b that I found on moates to copy the description from. It should be the same on the the others. Here is a screenshot from the tunerpro xdf. FWIW I just converted my car to 6E and it is alot better already, 4 hours tuning and all I have left is WOT stuff. Idles perfect....
Randy
Randy
Thread Starter
Supreme Member
iTrader: (2)
Joined: May 2007
Posts: 2,574
Likes: 0
From: right behind you
Car: '85 maro
Engine: In the works...
Transmission: TH700 R4
Axle/Gears: 3.73 posi
Re: $32b cylinder select hex
I just figured out what my problem was. Output type was set as floating point instead of hex. Duh! Thanks for the help anyway.
Last edited by bl85c; Oct 20, 2007 at 01:23 AM.
Thread
Thread Starter
Forum
Replies
Last Post