I got to the point this morning where i was going to copy my stock chip to the computer. When i pulled the lid it said ADS Super Chip. Hummm where do i go from here? My car and this chip are setup for an 88 iroc 350/auto. The chip id is 8820-A. My question is how do i tune this thing since its not the stock memcal, or is it? I', using Burn2 with adapters. Just having trouble readin the chip with moates software? Thank you for all the help. Oh one last thing the new motor is an 383 with 34lb injectors if you need to know. Thanks again

 

Start with a stock BIN, no if's-and's-or-but's. Set the ADS PROM aside for some rainy day when you are bored. It will give you something to do as you read the chip and see what changes they made.

The MEMCAL may or may not be stock. Usually the aftermarket chip came with an adapter which plugged in where the MEMCAL was, and the MEMCAL plugged into the side of the adapter. If no adpater, then I don't know what the MEMCAL is set up for.

See what numbers are on the two small 'chips' and do a search here on those numbers. I think that the stock MEMCAL numbers have been posted in the past.

RBob.