305 to 350 + EBL
Thread Starter
Member
Joined: Feb 2006
Posts: 499
Likes: 0
From: Rock Hill, SC
Car: 91 GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: stock
305 to 350 + EBL
I will be starting my 350 swap in the coming months and have some questions about using the EBL with it. Can i use my stock L03 ecm to run my new 350 with ebl since i know it has to be modified or will i need a 350 ecm to start? Once ive gotten my ecm and software taken care of, where can i get a base bin to start with?
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: 305 to 350 + EBL
The stock '8746 ECM will work with the EBL Flash and the 350 engine. You may also purchase an ECM with the EBL Flash already installed. This too is a good way to go.
Included with the EBL are 30-some base calibrations. There are a bunch for the L05 engines. Then a couple for the TPI L98 engines. So depending upon which heads & cam are in the 350 you can go with a L05 calibration. Or, start with one and copy the L98 spark tables into it.
RBob.
Included with the EBL are 30-some base calibrations. There are a bunch for the L05 engines. Then a couple for the TPI L98 engines. So depending upon which heads & cam are in the 350 you can go with a L05 calibration. Or, start with one and copy the L98 spark tables into it.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post
