So I decided to take the plunge into prom burning. I am in the process of doing a carb to TBI swap and I pretty much have all the components ready to go. I have the 746 ecm out of a 1991 RS Camaro. Now my problem is that I don't have a chip and I know this car had VATS. What I want to do is burn a chip with the closest stock bin to my setup and just disable VATS and EGR. Then I can start datalogging.

Does anybody have any recommendations as to what stock bin I can start with?

This is my setup.
L98 long block
Edelbrock Performer Intake
454 GM TBI w/ 65# injectors
T5

Thanks for any help.

 

No TBI BIN is going to be good for that set up. Mostly due to the SA requirements. However, using the SA table values from a L98 BIN will alleviate that issue.

AXKW should be a good starting point.

RBob.