Help with tunerpro
Thread Starter
Junior Member
Joined: Jul 2016
Posts: 88
Likes: 1
Car: 90 iroc z
Engine: 358 tpi
Transmission: Auto
Joined: Dec 2004
Posts: 16,901
Likes: 1,014
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Help with tunerpro
Correct, the values when changed will be red. After you do the paste save the .bin
Joined: Dec 2004
Posts: 16,901
Likes: 1,014
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Help with tunerpro
There is a flag table for code 32 and vats.
Disable them there.
As for the egr to disable it there is a manifold air temperate setting mat vs egr. You need to max this value.
Disable them there.
As for the egr to disable it there is a manifold air temperate setting mat vs egr. You need to max this value.
Joined: Dec 2004
Posts: 16,901
Likes: 1,014
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Help with tunerpro
If you have trouble finding something there is a parameter finder in the tool bar.
Thread
Thread Starter
Forum
Replies
Last Post