With the disappearance of Moates, I am looking for an alternative emulator. Does anyone use the Pocket Romulator from Transtronics and what is/was your experience with it

Don
Williamsburg, VA

 

I haven't tried the pocket romulator but it is tried and true. Old school. This might be of interest
https://mygeekyhobby.com/2020/07/05/eprom-emulator/

 

I used it for a number of years before getting the Ostrich.

It's supported by Tunerpro and Tunercat.

It worked good.

 

https://www.bmdevs-shop.com/product/bmulator

 

Just have to get one that Tunerpro supports.

According to their website...

 

According to the BMutator web site, it is supported in TunerPro. It seems focused on Honda. Not sure about 7730 ECU. Not much into spending $200 for an experiment.

Would like to communicate with Transtronics about the Pocket Emulator, but they never respond to emails. That always creates a concern about product support.

Would sure like to find a APU

Don
Williamsburg, VA

 

Looks like it could work with a socketed memcal or typical G1 style adapter using the 2 included 14 pin headers. Might have to stack up a few sockets for clearance above the case. I like the idea of eliminating the ribbon cable.

Might even fit inside the case. Hopefully somebody will try one of these.

 

That’s trick, it might fit directly into the dip I soldered onto the memcal with eeprom removed.


https://www.facebook.com/marketplace/item/636415061447095/?mibextid=6ojiHh

 

CobraRTP