Tim, I'm sure you're going to say something to I'll just address the question to you. Do you have plans on making a rich/lean guage? I know how to read with my multimeter but I'd rather have something hard wired. You seemed to be full of schimatics.

------------------
, Jon (91 RS too many mods to list)

 

Here's a set of schematics that include an O2 sensor output (linear 50 mv / step) LED bargraph, a logrithmic TPS LED bargraph, an adjustible threshold WOT A/C compressor cut out, and an adjustible threshold NOS relay enable. I have built and tested this circuit - it's installed on Willie's '87 IROC.

<IMG SRC = "http://albums.photopoint.com/j/View?u=1554272&a=11793907&p=43214491">

<IMG SRC = "http://albums.photopoint.com/j/View?u=1554272&a=11793907&p=43214484">

<IMG SRC = "http://albums.photopoint.com/j/View?u=1554272&a=11793907&p=43214481">

Here are the direct links for the schematic sheets:

http://albums.photopoint.com/j/View?...907&p=43214491

http://albums.photopoint.com/j/View?...907&p=43214484

http://albums.photopoint.com/j/View?...907&p=43214481

Tim

[This message has been edited by Tim Burgess (edited March 09, 2001).]

[This message has been edited by Tim Burgess (edited March 09, 2001).]

 

That looks to be a little over my head right now. Tim, how much would it take to have you make one for me? e-mail me

------------------
, Jon (91 RS too many mods to list)

 

sorry to bring this back from the dead but does anyone have these schematics the links are dead