Help, wiring injectors in
Thread Starter
Junior Member
Joined: Feb 2001
Posts: 43
Likes: 2
From: michigan
Help, wiring injectors in
I'm wiring the injectors in my jeep. I don't have the shop schematic right here but there are two wires that go to the ip harness. I'm thinking they need to be hooked up to a accessory power i think. Anybody know for sure?
Supreme Member
Joined: Jul 1999
Posts: 1,335
Likes: 2
From: Tucson, AZ, USA
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
There are two pink / black wires that power each bank of 4 injectors. Each should be connected to ignition (hot in crank and run) power through its own separate 10 ampere fuse.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
Thread Starter
Junior Member
Joined: Feb 2001
Posts: 43
Likes: 2
From: michigan
thanks tim
<font face="Verdana, Arial" size="2">Originally posted by Tim Burgess:
There are two pink / black wires that power each bank of 4 injectors. Each should be connected to ignition (hot in crank and run) power through its own separate 10 ampere fuse.
</font>
There are two pink / black wires that power each bank of 4 injectors. Each should be connected to ignition (hot in crank and run) power through its own separate 10 ampere fuse.
</font>
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
