Voltage problem related to Choke Relay?
Thread Starter
Junior Member
Joined: Aug 2001
Posts: 21
Likes: 0
From: Oradell, NJ
Voltage problem related to Choke Relay?
I've got this weird problem, that I'm sure is related to the choke heater relay. Please read my earlier post -
https://www.thirdgen.org/messgboard/...ML/002159.html
Since then I've bought a new choke relay and run all wires to the right places. Same problem! Now I've removed the relay, and made a jumper wire to feed the alternator and choke full 12-14V all the time.
Any thoughts on what's causing the voltage to drop with the relay in the circuit, and am i doing any damage with the jumper?
https://www.thirdgen.org/messgboard/...ML/002159.html
Since then I've bought a new choke relay and run all wires to the right places. Same problem! Now I've removed the relay, and made a jumper wire to feed the alternator and choke full 12-14V all the time.
Any thoughts on what's causing the voltage to drop with the relay in the circuit, and am i doing any damage with the jumper?
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
db057
TBI
10
Aug 11, 2015 10:11 PM
