im wiring up some illuminating gas and brake pedals and was wandering can i send the wire through the fire wall and were is the best spot to put the switch

 

Why don't you just get the power from the fuse panel? An ignition circuit would be good, so that the pedals would go dark with the key off. Or connect them to the tail light circuit, so that they are on whenever the lights are on.

All of that wiring is already under the dash.

------------------
Later,
Vader
------------------
If you want to beat the World, it might reach up and pull you down...
Adobe Acrobat Reader

 

Word of wisdom..why make something light up that your feet are going to be covering. Just do what I did..use neon highlighting cables and blacklights...rocks when you are rollin through town..:P

But yes, he was right about those circuits. It all depends on when you want them on.

------------------
305IrocZ28- Al
1990 Iroc-Z
305 TPI
0-60 in 6.8 (timed)
2.73 Posi (3.42 or 3.73 to come)
Flowmaster exhaust
T-tops
Red w/ black racing stripes
Pioneer headunit, stock speakers, Rockford 10'' punch woofers

Ricers beware...I eat you three meals a day

And the Camaro said to the Civic "Now, I know what you're thinking...in all of that mess, did he have 8 cylinders, or only 6? You just gotta ask yourself one question...do you feel lucky? Well do ya....punk???

 

i agree that you should tap into the circuits already in the car less mess under the hood.

but if you must their are at least two main holes located on the firewall on either side of the car; both having rubber grommet type covers that can be easily removed so that you can pass a wire through.