Sunday when I drove my car the blower would not blow. I thought it might be the blower switch again(replaced it last month) So I got another switch today and its still not working??

I checked all the fuses and relays, Is there anything else??


Thanks

 

Could be the blower motor itself.I had to replace mine in my 90,it is very easy.It's under the hood back on the fire wall on the passenger side.I think I paid about $25 at Autozone.

 

The blower was the 1st thing I checked.
Im takin it to a freinds shop tomorrow to get it checked out. He thinks its the power-module, so I order one from our warehouse today.
It should be fixed tomorrow.

P.S ... I never shop at autozone!

Peace

 

if the resistor pack has failed, the blower motor should still work when the fan speed is set on "high".

while you've got the engine running and the climate controls set to the on position, pop the hood and give the blower motor a couple hits with a hammer or a big screwdriver. if it starts spinning, you've found your problem.

 

Fixed!!!!

If anybody ever has the same problem, the proper name for it is the "power mode switch" Delco # 15-71113 cost me 7.34.




Peace