the throttle body on my '88 firebird started leaking gas, so i switched it with another throttle body, but the new one has a triangle shape plug for the throttle posisition sensor, mine had a flat plug, with the three wires in a line.
I don't have the plug from the new throttle body so i'm not sure which wires go where.
My wiring harnes has a black, gray, and a dark blue wire going to this sensor located on the front passenger side of the throttle body.
So if anyone can help, i would really appreciate it.
Thanks A Lot
Patrick Clark

 

if someone with a throttle body with one of those round plugs, for the throttle posisition sensor, could tell me which wires go to what, i could probally figure it out.

the three wires are in a triangle shape in the round plug.

so if anyone could help me out, i would really appreciate it.

Thanks Again
Patrick Clark

 

I don't know the pin relation between the two. Easiest would be to go to the junkyard and get a new connector or get one from you local parts store.

Here is a drawing of the wires on my 91 tps.. might help.. might not...