I just put a t56 transmission into my 86 Camaro and I am installing a Cable-X, which is a box that converts the electronic VSS on the t56 to a mechanical signal so I can use my stock speedo. My problem is I need to find the high side of the VSS to hook into the Cable-X, but when I test the resistance on both wires from the VSS my multi-meter doesn't show any readings at all. Please help, I want to get this thing working. How does the electronic VSS work, do I somehow need to get power to it?

Thanks

 

any ideas, I did a search on VSS but there was nothing that helped me

 

If your meter doesn't show anything (make sure it's set on "Ohms") then your sensor is toast. Make sure you get a good connection though and make sure you're testing the right wires.

 

If I plug my meter directly into the VSS should I still get readings?

thanks for your help, I really appreciate it.