oil pressure sending units
Thread Starter
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
oil pressure sending units
on electric units are the spade terminal connector type ones for lights- and the round threaded stud connector type ones for guages- or is it other way around ?
thanks
thanks
Supreme Member
iTrader: (3)
Joined: Feb 2003
Posts: 2,065
Likes: 0
From: California
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
fast
my 82 t/a with gauges had one that threaded into a brass fitting had one flat terminal
my 82 t/a with gauges had one that threaded into a brass fitting had one flat terminal
Supreme Member
iTrader: (3)
Joined: Feb 2003
Posts: 2,065
Likes: 0
From: California
Car: 1982 Trans Am & 1982 Corvette
Engine: L-98 with LO-3 induction. 350 CFI
Transmission: 5 speed and vette has 700r4
Axle/Gears: 373's in T/A .. vette unknown
iM THINKING A GOOD 2 1/2 INCHES AT ANY RATE
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
There were 2 styles for the gauge, the 2nd style was in the oil pressure switch, the 1st, which I have, is hard to see but, this is the sender for the gauge that you'll most likely want...
Thread Starter
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
deadbird's looks like the small style one, the trucks and such i know use alot bigger of one, but they are electric with guages too after about '77
theres got to be some way of knowing what size and connection type is for guages or lights, ive got millions of units laying around but no clue what they are for, some are spade and some are post and some are bigger and some are smaller. apparently third gen F body used smaller spade ones.
hmm,.,
theres got to be some way of knowing what size and connection type is for guages or lights, ive got millions of units laying around but no clue what they are for, some are spade and some are post and some are bigger and some are smaller. apparently third gen F body used smaller spade ones.
hmm,.,
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM