Hi

both turn signal bulbs are out. How do you change them? Remove the gages plate and then the glass? Are all the bulbs under there the same? Doyou need special tools?

Thanks, Dora

 

You can access most of the gauge instrumentation bulbs by just removing the black bezel, plastic lens, reflector. The fuel, tach, volt and temperature gauges can then be carefully pulled out of the white carrier to gain access to the bulbs.

Unfortunately, the turn signal indicator bulbs are down inside a long tube and you'll have to remove the gauge cluster from the dash to get to them.

While you have the cluster out of the dash, you should replace all the other light bulbs. That way you won't have to remove the cluster again for a while.

 

Check the following link for some info/pics that may prove useful:

https://www.thirdgen.org/techbb2/sho...hreadid=249244

JamesC