Starter wiring 88 GTA
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 40
Likes: 0
From: Kansas City
Car: 1988 GTA 1988 Z28 1983 Silverado 4X4
Engine: ZZ4 opt 4 in GTA, drag car Z28, and 350 4X4
Transmission: 700r4 for now GTA, none Z28, TH350 4X4
Starter wiring 88 GTA
which wires go where on a chevy 350
there is the power source {connects to post}
and two smaller red wires with connectors on them to either go to post or bolt
and two black with same connectors with what seems to be inline fuses on them..
im lost.. been over a year since i took apart and i know shame on me for not marking
LA
there is the power source {connects to post}
and two smaller red wires with connectors on them to either go to post or bolt
and two black with same connectors with what seems to be inline fuses on them..
im lost.. been over a year since i took apart and i know shame on me for not marking
LA
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 40
Likes: 0
From: Kansas City
Car: 1988 GTA 1988 Z28 1983 Silverado 4X4
Engine: ZZ4 opt 4 in GTA, drag car Z28, and 350 4X4
Transmission: 700r4 for now GTA, none Z28, TH350 4X4
someone for the love of *** HELP.. damn i cant get anyone to help out
LA
LA
I have 4 hours inbetween classes today so I'll take a shot at helping you out. I recently built my new 85 IROC and fired her up 9/5 so its fresh in my head.
I have a remote starter soleinoid (sp) so it may be slightly different but overall those 2 smaller gauge red wires go to battery for 12vdc power, large gauge wire from 12vdc to starter, large gauge wire from alternater to 12vdc.
I don't know about the two black wires w/ inline fuses, however with the addition of hooking up the neutral saftey switch the wires i called out should be all you need.
My neutral saftey switch runs off a special post on my aftermarket soleinoid so I couldn't tell you where it is supposed to run.
Other then that you'll need to hook up 1 and 2 posts on your alternator to what i believe 1 goes to starter to tell alt when to start charging the bat, and 2 goes to voltmeter HOWEVER THIS IS ONLY A GUESS - i haven't been able to confirm that.
I'm sure i missed quite a bit but this was enough to start up for me.
I have a remote starter soleinoid (sp) so it may be slightly different but overall those 2 smaller gauge red wires go to battery for 12vdc power, large gauge wire from 12vdc to starter, large gauge wire from alternater to 12vdc.
I don't know about the two black wires w/ inline fuses, however with the addition of hooking up the neutral saftey switch the wires i called out should be all you need.
My neutral saftey switch runs off a special post on my aftermarket soleinoid so I couldn't tell you where it is supposed to run.
Other then that you'll need to hook up 1 and 2 posts on your alternator to what i believe 1 goes to starter to tell alt when to start charging the bat, and 2 goes to voltmeter HOWEVER THIS IS ONLY A GUESS - i haven't been able to confirm that.
I'm sure i missed quite a bit but this was enough to start up for me.
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 40
Likes: 0
From: Kansas City
Car: 1988 GTA 1988 Z28 1983 Silverado 4X4
Engine: ZZ4 opt 4 in GTA, drag car Z28, and 350 4X4
Transmission: 700r4 for now GTA, none Z28, TH350 4X4
cool thank you .. i have a one wire ALT but i realized this starter is to old for my car so im changin it out tonight with the right one i have in my garage.. will post update
LA
LA
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
db057
TBI
10
Aug 11, 2015 10:11 PM
