i purchased a lt1 vats bypass module. it was a painless. and i dont have the wiring diagram or even the pinouts of where the 3 wires go. i need help. its a black little box with 3 wires. black red green. what are the pin outs for this on the ecm? 95 lt1 btw


lt1350 uses this
grey module to pcm black plug pin 29
blue module to prm red plug pin 25
black module = ground

would it be this for painless?
grey module to pcm black plug pin 29
red module to pcm red plug pin 25
black module to ground?