my car didnt come with remote hatch but was an option that year I was curious if the wiring would be in the car still but just not used? so i could hook it up

 

should all be there. it is on the birds. i added a remote hatch release to my 1986 2.8L bird.

 

did u just open up that plastic dash cover and there was a open connector?
do i need to hook anything up to the rear hatch motor too?

 

Actually all you would have is the plug underneath the center console. You need to get the release or motor, the wiring, the solenoid, relay, switch etc to make it work.

 

i heard a horn relay works i have a few of em but where does the Realy go? can u support a pic of the relays location thats my main Q

 

I can, but I would have to dissasemble my center console. I will do it asap

 

OK, I couldn't find my camera so I will do my best to describe it. Under the center console you should find a set of brown and orange wires with a female plug at the end. You will need the relay housing, on one end of the housing is a set of a yellow and orange wires that has a male plug, which plugs into the female under the console, out of the relay housing is another set of wires orange and brown that plugs into the switch. Now the relay is small and black and I got the # 329820 off of it. I hope this helps.
Lawrence

 

i found the connection for the switch but not the relay.... looked very hard too if someone can get a pic and step by step insturctions it would be much appricated

 

You won't find the relay, you have to have the complete wiring from a donor car that has it. It runs from the center console to the hatch release, I installed it when I did my interior swap, carpet and everything removed from the car.

 

i found the relay housing but no wires so i guess im not even gonna waste my time