compuwiz1937

iTrader: (17)

My car didn't come with any power options except the trunk pop and I'm working on adding all of them. I've already added locks and windows by getting a complete factory harness (mirrors haven't been put on yet) that was basically plug 'n play into the plug under the driver side dash. I had to buy the circuit breaker to plug into the fuse box and then it all worked fine. I looked in the manual and it says that that circuit breaker is also for the power seat. So I'm trying to find out if there is just a plug under the carpet that I plug the power seat track into or if I'm going to have to fab something up. Also, if there is a plug under the carpet is it the same as it is for the 4th gen track?

Thanks.

Jim85IROC

iTrader: (2)

if your car didn't come with power seats, you won't have the plug under the carpet.

pmpn

I'm unsure if the plug will be there or not. 4th gen power seat plugs are different than 3rd gens (at least in mine.) Wires are the same, just cut/splice.

Zed'er

My 84' didn't come with power seats, but has the harness for the option.

compuwiz1937

iTrader: (17)

Alright, thanks for the help. When I ran the wires for the window switches under the carpet I didn't check and see if there were any plugs under there, but I couldn't really see anyway since I couldn't pull up much of the carpet. When I get my track I'll check and see if there's a plug under there, if so I guess I'll update this thread to help other people with the same question.