sunpro tach
Thread Starter
Junior Member
Joined: Jan 2007
Posts: 41
Likes: 0
From: in a small town
Car: 88 iroc
Engine: 305
Transmission: 5 speed
Axle/Gears: dount know
sunpro tach
im in stalling a sunpro tachII on my 88 camaro 305 tpi 5 speed what i need to know is whar to hook the green wire hooks up to thar it sposed to go to the dis if some 1 has pics of thar install would like to see
Last edited by mr iroc; Mar 23, 2007 at 09:00 PM. Reason: CUZ I CAN
Senior Member
Joined: Dec 2006
Posts: 584
Likes: 0
From: toledo
Car: 1987 Z28
Engine: LG4
Transmission: T5
Axle/Gears: 3.23
Re: sunpro tach
Im sure this is the wire you need to hook up. (see attachments)
Member
Joined: Sep 2006
Posts: 119
Likes: 0
From: Avon, Ohio
Car: '86 Z28
Engine: 355
Transmission: 5 speed
Axle/Gears: standard 3.23
Re: sunpro tach
if you look at the distributor cap there are 2 clips on the drivers side and one of them says "tach" (should be the one oon the left) and should be a yellow(ish) wire. You should be able to take it from there...
Supreme Member
Joined: Jul 2005
Posts: 2,123
Likes: 0
From: North Central Mass.
Car: 1985 Berlinetta
Engine: Megasquirted TPI
Transmission: Transgo 700R4
Axle/Gears: 3.42
Re: sunpro tach
the non computer controlled GM HEI has a tach output, and IIRC the coil in cap HEI does as well. If not, you should be able to splice into the white wire on your external coil.
Thread
Thread Starter
Forum
Replies
Last Post
