Will do.

My avatar is my hazards in sequence. There is a way to get it to flash all 3 per side, 1 simple wire connection, but it is for turn & hazards, not just one or the other.

Round 4 MIGHT happen, if there is enought interest.


When people SAY they want one, 20 of them are built (the parts aren't free....$$$), then half of those people back out.... It's not like every one DIDN'T sell, but it's no fun to pay for all the parts, the have the buyers backing out. 10 interested in 2 months& 2 backed out, leaving 8. And it won't happen until happen until I 10 that DO pre-pay, so I don't even ask for $ until I hit 12 or 13, because somebody WILL back out. Hasn't failed to happen yet.

Would ya'll like to pre-pay/buy the whole batch of 20, the I let YOU retail them?

 

here are mine. ordered them from stephen last year, installed them about 2 months ago. 88 Firebird swapped taillights out for 82 trans am taillights.

 

hey im interested in purchasing. how much? what is it?(just instructions?)

 

Did you READ any posts? I guess noy....

NONE are available right now....It is some wiring modifications, and a custom designed circuit board device that creates the seuential flashing lights.

But none are available right now. I'll talk to my buddy today about the possibility making more

 

hey stephen. i am looking into getting another trans am. i will be looking at it tuesday. i think i am going to get it and if i do i will most definately be interested in another of your sts units if you and lou are going to make more. just posting to get on your list for round four since i was in on round two. and any of you guys who think that this is a hard mod to do. it isnt! this is very easy and stephen and lou make sure these things get to your door fast.

 

this looks way cool! I just stumbled across this thread but I'm thinking I'd love two of 'em fer shur!!! ( if yer gonna build more that is? hint, hint... nudge, nudge... wink, wink say n'more.) I have a '91 formula (600+ hp 10 sec. strip/street car) & a '98 Z28 bone stock, daily driver that are both SCREAMIN for this mod!!! so if yer makin a list I also want in man!!
thanx!

 

hey stephen i just bought another t/a so put me down for another unit if and when you start. this is a must for the new car.

 

I've got ya'll written down. I'm waiting to hear back (sent aPM today, forgot to ask Sunday) about making more.

 

count me in for a set

 

I've had your name down since you posted so on 5/8, no worries!

The question is, like before....I have 12 "sold"....How many won't want one, come time to actually BUY them?

 

well i am NOT backing out! i bought one before and this works great. wife would kill me if her new toy didn't have this cause she loves mine.

 

Keep me in mind in the future if you make anymore.

 

It may be the end of Summer before more can be made.

If/when it happens, I'll start a new thread & see if there is still enough interest to proceed.

 

haha kinda. got through the first Page and said ****it. but anyhoo, put me down on ur list. ill take one for sure.


ps what the price?

 

The first batches were selling for $50 shipped, but after the last batch, we're gonna find a different circuit board supplier. They raised their price to do the last batch, among other problems with them, but our price didn't change.

So, it MAY change, depending on we can get the boards made for.

 

Count me in!!!!
I'll take two!

 

Count me in too!!!

 

iam in

 

Just finished my tail light wiring yesterday, and absolutely have to have this mod. Consider me in if/when Round 4 happens!

 

Count me in for a definite sale of one unit whenever you make more of them!

 

I will start a Rnd 4 thread, if & when it happens, & PM them the day before I offer them to the rest of the public.

 

Add me to the list for round 4, or any no shows of round 3.

I have had the car since new and have no intentions of ever getting rid of her, so when your ready I am too. Guess that means I have already been waiting 18 years for this mod

Thanks for sharing a very cool idea!

 

Round 3 has come& buy...Everything sold, so...no "no shows" at the end.

As typical, I got PMs in all 3 rounds of "I'll send the $ out tomorrow." But like a business would...I'm not holding a unit based on promises. First pay=first shipped.

 

So if I send payment, you have some to sell? I am ready to buy / pay if you have any left....let me know.

 

No. Zero to sell right ow, not even the parts. The printed circuit boards are custom designed & built in batches of 20. So, 60 have been sent out.

If there appears to be enough interest, I may go for 40 in Round 4.

 

If you go Round 4, i am sure to buy one.

 

I've got your name down on the list.

If we do this, I'll PM the names on the list before I post a Rnd. 4 thread. Give the ones that showed early interest the chance to get them before offering them to the rest of the public.

With that being said to everyone else...Feel free to PM me with interest& you'll get first shot at them. The list is only for names. First paid, first shipped.

 

okay so how much you want and how can i pay you i would like to install before fall/winter

 

They aren't being made yet...Possibly end of Summer/Fall.

Your name is on the list & you'll get a PM when they are going to be made.

 

Does any one have pics, or footage of these on a camaro with grid style taillights?

 

I wish....In fact, I've only seen like 2 of them installed, both Pontiacs, of the 60 that have been sold. In the beginning, there was a bit of difficulty in determining in how to make them work on a Camaro, as the harness wiring is different. But that has figured out & included in the instructions.

 

Hey Lou,

Just to be clear on the under dash mod...I cut the blue wire to the brake switch and then when I attach it to the white wire do I just add it in, or does the white wire get cut and the blue wire go to one end or the other?

Thanks!

 

Yup, just add the light blue wire to the white one. You don't really need to, though. You can cut the white one and use only the half from the steering column. It's up to you.

Hope this helps.
Lou

 

Ok, so if you cut the white wire it is just originally just terminating on that block?

 

Stephen just checking to make sure you have my name down on the list as I have been keeping an eye on this for quite a long time.

 

Yes..Your name is #5 on my list.

 

 

Ok, I'm pretty much good to go, did the under dash conversion and just need to tidy the backend up permanetly.

One big question though, my flasher is so quick the outside light never lights with the turn signal.

How can I slow this down? Just with another flasher? What's a good donor vehicle? I don't think these things are rated in anyway (just heavy duty ones for towing).

 

The accuracy of our flashers is astounding: once per second +/- 4.5 years.
You'll need to find a flasher that's slow enough for the STS. We had the same problem, had to go through about 3 flashers until we found one that isn't too fast.
Another option is to buy/make an adjustable flasher.

Hope this helps.
Lou

 

If you have some plans for an adjustable flasher I'd love to see them

 

stephen how much is it for 20kits not sell price but just the hardware price. I could possibly put the money up.

Also can you make ones with a slower flash rate? found where to get new flashers? or would little resistors work on each bulb wire?

 

What do you mean by "kit"? These are sold assembled, not as you assemble pieces. And you hafta buy 2 sockets yourself, if you need the extra sockets.

Now, I have gone & gotten sockets for an overseas customer, as he can't exactly just walk in Pep Boys & get them.

I could get sockets for USA customers, but honestly? It's cheaper for YOU to get them than me. No extra shipping weight, etc.

As for the flash rate....These do nothing to control the flash rate. Your stock flasher controls the rate at which they flash. I've seen an adjustable flasher on eBay, but it was $25. A STS customer bought one & yes...It worked great. Just wasn't worth $25 (to me) to buy one. Not only that, but I (personally) have a problem with 1 cent auctions with $25 shipping, which was how that one was listed.

 

No Load Adjustable Flasher

Description:CONVERT TO LED! Keep It Clean’s No Load Flasher is great for LED taillights! Plugs directly into our... MoreCatalog #:10306602Manufacturer:Keep It CleanList Price:$44.74Today's Price:$36.35You Save:$8.39 (19%)Shipping:All products are shipped UPS Ground (3-5 business days)
unless otherwise stated in the product description.Stock:72 No Load Adjustable Pulse Flasher
No Load Adjustable Pulse Flasher - FF552NLP By Keep It Clean
No Load Adjustable Flasher

 

$45 for a flasher..No thanks...Not for me.

 

Lol, it is steep but that is the perfect fit with your unit.

What did you get your flasher from?

Is the speed in the avatar correct or slowed down?

 

It's the flasher that was inn the car when I bought the car 3 years ago. That would basically double the STS cost.

The avatar speed is looks accurate. I had a friend make it, & as far as I know, he didn't modify it.

 

Sure that particular unit would double the cost, but there must be a low cost one around somewhere.

Dig people dig!

 

I "think" I saw one some time ago that was a kit and cost around $15. But I can't find it again.

Flashers are one of the easiest circuits out there. Any idiot can build one with the 555. If I had the time, I'd make one. Does anybody have a few spare days to sell? I'll pay well!

Lou

 

I do!!! No shipping even. How much you willing to pay for one?

 

hey stephen just checking in to see if you had found a supplier or not? cause it seems like round 4 might be good to go if you had. just waiting to see if my 86 gets to have one like the 88!