vats question
03-29-2008, 03:09 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: kankakee IL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 firebird
Engine: 350 lt-1 crate motor
Transmission: borg warner t-5
Axle/Gears: stock 3.27 posi rear disk
vats question
can I bypass the vats system on an 89' formula 350?if so what do I need to do it?
03-29-2008, 04:42 PM
#2
Senior Member
iTrader: (14)
Join Date: Oct 2006
Location: erlangen, Germany
Posts: 823
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28 1LE
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
Re: vats question
there is a tech article about how to do it.
Basically you just need to know the resistance in your key and then between the ignition and the vats pass key box put that level of resistance in the wire to fool the system.
Also if you ever need a custom chip burned you can disable it that way also.
Basically you just need to know the resistance in your key and then between the ignition and the vats pass key box put that level of resistance in the wire to fool the system.
Also if you ever need a custom chip burned you can disable it that way also.
Thread
Thread Starter
Forum
Replies
Last Post