I am trying to wire my new LED guage inlays from SRP in to 91 RS. the instructions are very vague, very generic (not model specific) and seem to have beenwritten by an english as a second language class...

They say to wire the power and ground wires from the inverter that came with the gauges into the power and ground wire on the parking light switch, so that the gauges light up when you turn on the parking lights.

I got behind the headlight switch and there are several wires on the connector at the back of it. I found the red and black wires and spliced in the wires from my gauges. Everything works, except the guages light up even with the headlights off and no key in the ignition.

Can someone help me figue out which wires are the parking light switch. Pictures would be great if possible.

Thanks