keyless entry: how to add flasher function
Thread Starter
Member
Joined: Nov 2001
Posts: 245
Likes: 1
From: somewhere over the pond
Car: '91 Z28
Engine: LB9
Transmission: T5
Axle/Gears: 3.42
keyless entry: how to add flasher function
I just added a keyless entry system. Now I want to add the park-/taillamp flash function. I'm not sure witch wires I have to connect. Anyone can help me with this one. Eventually with pics?
Junior Member
Joined: Jun 2008
Posts: 62
Likes: 0
Car: '91 RS
Engine: 355 on a stand
Transmission: 700R4
Axle/Gears: 3:42
Re: keyless entry: how to add flasher function
You'll want to connect the output of your relay (the one you connect to your keyless entry system as per its instructions) to the brown wire at terminal E of the light switch. You can also access this wire at terminal B1 on connector C100, the big connector with (up to) 42 wires that goes thru the firewall on the driver's side. Looking from the interior, terminal B1 will be the second row from the top, first on the right.
Thread
Thread Starter
Forum
Replies
Last Post
