Wiring Connector Melting
Thread Starter
Member
Joined: Nov 2003
Posts: 388
Likes: 0
From: Victoria, British Columbia
Car: 1989 GTA
Engine: 5.0 TPI
Transmission: T-5 WC
Axle/Gears: Yukon 3.73
Wiring Connector Melting
I have a 1989 Pontiac GTA.
There is a wiring harness connector up by the firewall just above the plastic plenum extension. Two connectors clip together and are attached to a metal clip which is bolted to the firewall. The first connector has a black/green wire and a thick black wire going to it. The second connector has a light green, a green and a black wire going to it. The first connector is melting and breaking down.
Does anyone know what this connector is and where I could buy a replacement? I looked on TPI Parts but they do not seem to have it.
There is a wiring harness connector up by the firewall just above the plastic plenum extension. Two connectors clip together and are attached to a metal clip which is bolted to the firewall. The first connector has a black/green wire and a thick black wire going to it. The second connector has a light green, a green and a black wire going to it. The first connector is melting and breaking down.
Does anyone know what this connector is and where I could buy a replacement? I looked on TPI Parts but they do not seem to have it.
Thread Starter
Member
Joined: Nov 2003
Posts: 388
Likes: 0
From: Victoria, British Columbia
Car: 1989 GTA
Engine: 5.0 TPI
Transmission: T-5 WC
Axle/Gears: Yukon 3.73
Re: Wiring Connector Melting
I found a picture of the connector. Can any one confirm what the middle big black rectangular connector is with the green, green and black wires going into it is.
https://www.thirdgen.org/forums/elec...ing-these.html
https://www.thirdgen.org/forums/elec...ing-these.html
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
