does or has anybody ever added power mirrors to their third gen? if so, how?

 

I did - got a set from ebay, and just installed same as the manual mirror (on the door). I happened to get the entire power mirror wiring harness as well, so I didn't have to wire them myself. I just ran the wires through the hose from the footwell to the door, and plugged them up. At the end of the wiring harness, there's a + and - wire - just ground the one and get a power source for the other (I tapped into a spare hole in my fuse panel). If you get the harness as well, then it's just a plug n play deal.