Cutting out an alarm
Thread Starter
Member
Joined: Jun 2009
Posts: 164
Likes: 0
From: MC Michigan.
Car: 1987 Firebird
Engine: 2.8l V6
Cutting out an alarm
I have never done it.
It needs to be done.
How do i do it.
My car is a 1987 Firebird. No VATS. Its a prestige alarm.
It cuts out fuel flow.
Does anyone have any experience doing this?
Thanks, Schwinny
It needs to be done.
How do i do it.
My car is a 1987 Firebird. No VATS. Its a prestige alarm.
It cuts out fuel flow.
Does anyone have any experience doing this?
Thanks, Schwinny
Member
Joined: Jan 2008
Posts: 194
Likes: 0
From: close to Wichita Kansas
Car: '91 RS CP now is the son's driver
Engine: CP =3.1, will get V-8 maybe someday
Transmission: stock
Axle/Gears: 3.42 posi W/ disks
Re: Cutting out an alarm
find the alarm box, generally under the steering column, start folowing the wires, write down all of the colors coming out of the box, find the splices, write down these colors beside the wire colors coming out of the box, then look for wires that are the same color, look at each wire closely for striping and make note of it. you should be able to figure out what wires need to be re-spliced to get it to factory specs. good luck!
Member
Joined: Jan 2008
Posts: 194
Likes: 0
From: close to Wichita Kansas
Car: '91 RS CP now is the son's driver
Engine: CP =3.1, will get V-8 maybe someday
Transmission: stock
Axle/Gears: 3.42 posi W/ disks
Re: Cutting out an alarm
ps PM me your home email and I will send you a wiring diagram
Thread
Thread Starter
Forum
Replies
Last Post