Difference in Knock Sensor plug and fan temperature plug
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 38
Likes: 0
Car: 2017 Jeep Cherokee
Transmission: 6 Speed, 5 Speed T-5
Difference in Knock Sensor plug and fan temperature plug
Can anyone tell me the difference between the fan switch plug and knock sensor plugs on the passenger side on a 305 TBI vine e. Both are the same size. one is black and the other one is white. I dont know which color belongs with which. Thanks for your help!
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: Difference in Knock Sensor plug and fan temperature plug
Neither should be black.
Knock has dark blue. Fan switch has green/white.
Connect one of them to a ground with the key on, if the fan runs, then that's the fan switch wire.
http://www.austinthirdgen.org/mkport...ine_wiring.gif
Knock has dark blue. Fan switch has green/white.
Connect one of them to a ground with the key on, if the fan runs, then that's the fan switch wire.
http://www.austinthirdgen.org/mkport...ine_wiring.gif
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: Difference in Knock Sensor plug and fan temperature plug
I think iosigma was referring to the color of the connecting plugs. and Newbie is talking about the color of the wires they are attached to, but everybody's probably figured that out by now. Hey, I'm catching up!
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
