Installing cruise control on a bird that did not orignally have it.

Reply Subscribe

Thread Tools

Search this Thread

Jul 28, 2011 | 02:08 PM

Sparkko

Thread Starter

Junior Member

Joined: Jul 2011

Posts: 68

Likes: 1

From: Cullman, AL

Car: 1988 Firebird Formula

Engine: 5.0L 305 TBI

Installing cruise control on a bird that did not orignally have it.

I need to know if it will be difficult to install a cruise control system on my car. It's an 88' Formula that i am replacing the steering column in. The new column has cruise, and I need to know the parts I need to install it.

Jul 29, 2011 | 06:00 PM

Maverick H1L

Supreme Member

iTrader: (8)

Joined: Aug 2003

Posts: 7,240

Likes: 6

From: LeRoy, NY

Car: 2003 Hyundai Tiburon GT

Engine: 2.7L V6

Transmission: 6-speed

Axle/Gears: 4.41

Re: Installing cruise control on a bird that did not orignally have it.

You need the cruise modules and cable and both halves of the cruise control harness, the part in the engine compartment to the primary harness which is tied with the main dash harness that runs from one side of the car to the other. And possibly the brake cut-out switch if yours doesn't have it. The brake switch has a vacuum hose and one electrical connector on it.