startup problem
startup problem
im having trouble getting my 327 started. i pulled the motor a few weeks ago and now have it back in. when i go to fire it up all it does is crank over and wont fire. it fired once but nothing besides that. ive checked pretty much all i can and im stumped. it does have a msd distributor(8365) and i cant figure it out! any suggestions would be great, thanks guys
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Black 2 Basics
Have you checked for spark yet?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
Re: startup problem
im not too sure how too.... im pretty new at this stuff especially electrical stuff.... and i dont have a light tester either... ive been trying to get it going for a few days and nothing
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Black 2 Basics
Remove a spark plug wire from one of the plugs.
Insert a spare plug into the end.
Hold the ground part of the plug on a grounded part of the car such as the inner fender, engine block, etc.
Have a friend crank the engine.
If there is spark you will see and hear it arc in the plug.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
Insert a spare plug into the end.
Hold the ground part of the plug on a grounded part of the car such as the inner fender, engine block, etc.
Have a friend crank the engine.
If there is spark you will see and hear it arc in the plug.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
Thread
Thread Starter
Forum
Replies
Last Post




