Hi,

Two issues:

1. Often when I turn my right turn signal on the RPM, Oil pressure, and Battery charge gauges all stop working and kind of pulse with the blinker

2. At night if I have the lights on and try to turn the dash lights up (so I can see the gauges at night) I get a similar behavior as #1 above, gauges start acting weird.

Any ideas?

Thank you,

Shepp

 

Same here when i dim or brighten my dahs lights everything goes wack!
I recently pulled out my dash and reinstalle dit a while ago and now it does that

 

I know if you remove headlight switch and all the little stuff the gauges wont work at all. at least in my car

 

I don't believe this car has had it's dash pulled out, or the light switch/pull rod. It's all original.

Thanks,
Shepp

 

Well just a while ago i couldn't figure why mine were jumping. But i found a solution. Under your dash where the codes scanner goes connected there a 10mm bolt with a black ground wire connected there. That is your gauges ground. I moved it to a better pot which is the dash support on the bottom left side. Its a 10mm bolt too. I made the ground longer and placed it there and now all my gauges work and no interference with my lights or dimmer.

 

Very cool, I'll have to check this out over the weekend, thanks man!

Shepp

 

No problem just let me know what you find out or if you run into problems ill be more than happy to post pics.

 

I gotta check the dash lights on my friends car. His dash lights don't light up. I need some advice on it any takers?

 

my bad ...........please delete ................