all turn signals work except dash indicators???
Thread Starter
Junior Member
Joined: May 2012
Posts: 38
Likes: 0
From: Georgia
Car: Siverado SS, IROC-Z
Engine: 6.0/5.0
Transmission: 4L60E/T5
Axle/Gears: 4.10/3.73
all turn signals work except dash indicators???
to mark a long story short. when i bought my iroc the turn signals did NOT work. replaced the flasher and now everything except the dash indicators are working. anyone have any ideas?? thanks in advance Mark already checked the bulbs(194s) and they are fine.
Supreme Member
iTrader: (3)
Joined: Jul 2004
Posts: 2,989
Likes: 9
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: all turn signals work except dash indicators???
Possibly a bad contact on the instrument cluster? Bad bulb socket?
You would need to find out whether the bulbs are getting any power with the instrument cluster seated in the dash. I know it is not easy but that's your best option.
Btw, if you had a bad ground for the dash indicators, the two turn indicators would glow dimly with either turn signal on (backfeeding the ground through the other side turn signal).
Let us know what you find.
Lou
You would need to find out whether the bulbs are getting any power with the instrument cluster seated in the dash. I know it is not easy but that's your best option.
Btw, if you had a bad ground for the dash indicators, the two turn indicators would glow dimly with either turn signal on (backfeeding the ground through the other side turn signal).
Let us know what you find.
Lou
Junior Member
Joined: May 2011
Posts: 89
Likes: 0
From: Canada
Car: 87 Iroc-Z28
Engine: L98
Transmission: T5
Re: all turn signals work except dash indicators???
Not sure if this will help, but it's quick and easy...I had problems with my turn signals (inside and out) and cancelling cam...took steering wheel off and the turn signal switch seemed loose...tightened the 3? screws and BAM..everything worked.
Thread
Thread Starter
Forum
Replies
Last Post
