Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

starter wiring

Thread Tools
 
Search this Thread
 
Old Sep 23, 2012 | 06:26 PM
  #1  
IROC216's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2008
Posts: 36
Likes: 0
From: Cleveland,OH
Car: 1985 CAMARO
Engine: 350 v8 CARB
starter wiring

I just purchsed a 91 camaro rs with a unfinshed carbed 350 sbc swap. While doing a quick inspection once i got it home, i notice there was only one wire coming from the starter motor and the big wire that goes to the battery terminal. Neither are connected anywhere. I am pretty sure i need more than just that 1 wire. can somebody tell me what other wires i need and where they connect to on the starter motor?
Reply
Old Sep 23, 2012 | 06:55 PM
  #2  
vetteoz's Avatar
Supreme Member
20 Year Member
iTrader: (13)
 
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: starter wiring

Originally Posted by IROC216
I am pretty sure i need more than just that 1 wire.
Later cars had the power feeds direct from the batt ; not the starter terminal as in earlier cars
Should only need the purple wire from key to the starter solenoid terminal
Reply
Old Sep 25, 2012 | 11:05 AM
  #3  
IROC216's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2008
Posts: 36
Likes: 0
From: Cleveland,OH
Car: 1985 CAMARO
Engine: 350 v8 CARB
Re: starter wiring

are the wires from the starter that feed power to the car needed for the starter to spin the engine over? I have a +cable going to the battery from the starter and a smaller wire that is connected to the terminal closet to the engine. when i connect the smaller wire to the battery nothin really happens. The starter makes a noise like the gear is spinning but not coming out and conatcting the flywhel
Reply
Old Sep 27, 2012 | 09:09 AM
  #4  
vetteoz's Avatar
Supreme Member
20 Year Member
iTrader: (13)
 
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: starter wiring

Originally Posted by IROC216
when i connect the smaller wire to the battery nothin really happens.
The starter makes a noise like the gear is spinning but not coming out and conatcting the flywhel
That would indicate that the starter is faulty
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM
Caspar
TPI
24
Jun 19, 2016 11:19 PM
Accerrito22
Electronics
3
Aug 23, 2015 07:22 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM




All times are GMT -5. The time now is 02:46 PM.