Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

Electrical issue?

Thread Tools
 
Search this Thread
 
Old Jul 13, 2013 | 06:01 PM
  #1  
Aluseu's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 5
Likes: 0
Electrical issue?

So I still cant get my car running, starter was just replaced, spark plugs, plug wires, and a new fuel pump and it still wont run, I figured that the fuel pump isnt engaging so Im left to think its an electrical issue, I looked at the fuses under the dash and they all look fine except theres a spot where it says ign (ignition?) and ther isnt a fuse there? am I stupid or am I missing something? I also was told it could be the ignition control module whatever that is.
Reply
Old Jul 13, 2013 | 06:54 PM
  #2  
fireturd350's Avatar
Supreme Member
iTrader: (8)
 
Joined: Jul 2001
Posts: 3,204
Likes: 7
From: New Boston, IL, USA
Car: '90 Formula 350
Engine: 383 SBC
Transmission: ProBuilt S/S 700-R4 & ACT 9" Stall
Axle/Gears: 10 bolt 3.23
Re: Electrical issue?

Does the car crank when you try to start it?

I'm assuming you have a FI pump. Does it do the 2 second prime when you turn the key on?

Have you checked the fuel pump relay?
Reply
Old Jul 14, 2013 | 08:37 AM
  #3  
Aluseu's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2013
Posts: 5
Likes: 0
Re: Electrical issue?

Checked the relay and switched them all around and tried, nothing happened, tun the key and I do not hear the pump prime at all, even before i switched it out, the car cranks but does not fire, I have been having this issue since day 2 of having the car -.-
Reply
Old Jul 15, 2013 | 05:10 PM
  #4  
NINÅ's Avatar
Supreme Member
 
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Need Fuel 2 Rule

Originally Posted by Aluseu
theres a spot where it says ign
That has nothing to do with the problem.

Using a voltmeter or test light
(the type for testing for voltage, not a continuity tester) see if you have power on pin A of the pump relay orange wire.

(It doesn’t matter what position the key is in.)

If you don’t have power there check the inline fuse located NEAR THE BATTERY.

If there is power there, jump pin A to pin E
gray wire. for a second or two with a piece of wire.

Does the pump run when you do that?


Happy Racing!



I Never Fight In The Pits . . . . . . . . . My Pit Crew Does That For Me

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cornholio7979
TPI
4
Sep 20, 2018 02:31 AM
Gambit TA
Transmissions and Drivetrain
2
Sep 1, 2015 07:27 PM
BlackphantomZ28
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 22, 2015 01:00 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
mizz0313
Transmissions and Drivetrain
3
Aug 12, 2015 06:45 AM




All times are GMT -5. The time now is 11:38 PM.