Hello,

My turn left turn signal doesn't cancel, so I bought a new cancel cam and am hoping to install it today.

When I bought the car, it had an aftermarket Grant wheel on it, which I replaced. I just took the wheel back off, but I'm not sure how to continue - see attached pick.

Does this piece come off with a steering wheel puller? I think once I get that off, I have to depress the lock plate to the cancel cam. I have the lock plate tool and I have access to a steering wheel puller, I just want to make sure I do this correctly. Thanks.

 

yea mine had a grant one with the same piece your refering to, i had to gently tug on it with a puller to get it off, it just slides onto the splines on the steering shaft

 

Okay, thanks for the quick reply. I'm off to borrow the steering wheel puller so I can this.

I just realized that my horn has never worked, either - might be a good time to look into that as well although I don't know if I still have the stuff that came with my Grant wheel.

 

Just as a side note, I doubt it is your cancel cam. That's just a piece of plastic. Unless it's busted when you get in there, I'd look for a spring to be missing off of your turn signal switch.

 

anytime, and u can order all the stuff u need directly from grant if your missing anything, all i needed was the adapter kit and it all went right together, which wheel do u have?


and yes i agree for a missing spring also.