Here are the engine specs: 305 LG4 bored out 0.040", 1.94/1.50 58cc GM heads, Comp Cams XE249H, Summit double roller timing chain. Also comes with the stock intake/waterneck and your choice of chrome edelbrock or dart valve covers. This engine has about 10,000 miles on the rebuilt and is in great shape. The tranny is all original, and has had regular fluid and filter changes and works great. I am selling because I recently put a really hot 400 in my car, and the engine also came with a new tranny in the donor car. So, that's why I'm selling the other engine/tranny. In an auto with 3.70 rear and stock 2.25" exhaust with flowtech shorties, I was pulling low 14's with my g-tech on flat ground. I don't know how accurate these are, but as far as 305's go, this one runs pretty hard and has no problem revving right up to 6000 rpm.

I'd like $600 for the engine and tranny for local pickup in Seward, NE.

Thanks,
Eric

 

ttt

 

ttt

 

Any interest at all?

 

wouldn't be selling an aftermaket intake would you?

 

No, it's got the stock aluminum intake on it, which is basically identical to the Edelbrock 2101.

 

if only you lived in ohio......... My rebuild would become so much cheaper lol......

Anyways bump for a super impressive deal.

 

ttt

 

too far away or id probably have that 305 by now


hum


good luck

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

hi, do you have photos of the engine? thanks

 

No, I've got it all covered with rags and stuff packed around it, sitting in the corner of my garage. If you are seriously interested, I will get pics for you, if you are just more curious than anything, please understand why I don't have any pics.

Eric

 

i understand, thank you. i live in denver and am making a trip to michigan soon. if possible i can stop there on the way north if you are in seward and kinda near highway 80

 

I assume you are referring to Interstate 80. Yes, I am five miles north of the interstate at the Seward exit; doesn't get much closer. There's really not much to see. It isn't all painted up fancy or anything like that. The only problem with it was the oil pan was leaking just a little bit, but I've got the new gasket for it which I'd give to you with the engine. The engine runs hard, and doesn't use any oil or anything like that. Like I said, it's only got 10,000 miles on the rebuild.

Eric

 

ttt

 

Tranny sold, engine still available.

 

now that the tranny is gone how much you want for the engine alone?
im not sure if i would be able to pick it up but what id pay for shipping if possible

 

I'd take $550 for the engine. I was basically throwing the tranny in for free if somebody wanted to buy both. Since I sold the tranny for $50, I'd take $550 for the engine. I don't know how I'd crate it. If you can find a place that would crate it and you want to pay the fees, I'd be happy to accomodate you.

 

ttt

 

Engine still available. $525. Drop it in and have a great engine that will probably outlast your vehicle. Would work great in an f-body, g-body, or even a 1/2 ton pickup or blazer. Pickup only in Seward, NE.

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

Aahhh, you're too far away. That's a great deal!

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt

 

ttt