PARTING OUT 91 RS 305 IN HAMILTON NJ

Thread Tools
 
Search this Thread
 
Old Aug 12, 2006 | 06:31 PM
  #1  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
PARTING OUT 91 RS 305 IN HAMILTON NJ

Hey guys whats up....

parting out my 91, that only had 90k miles on it. in mint condition until a rear accident, everything from the quarter panels back to the rear bumper is screwed, but fortunately all the rest is still good for you guys to grab.... heres the detalis....

91 camaro rs LO3 TBI 305 (RUNS LIKE A DREAM....well maintained, running royal purple and a k&n filter), T-5 (shifts PERFECT), rear is kinda screwed, good rear 16 wheel + tire, good front 16 inch wheel + tire, GROUND FX ARE STILL MINT!!!! MINT INTERIOR!!!!!!!!!!!!!!!!!!!


97 camaro 30th aniversary seats front and rear, dash pad cover... etc

TELL ME WHAT YOU NEED

EMAIL: Jeepsterxj@gmail.com
AIM: OUTDONEYOU
CELL: 609-433-0271

and let me tell you guys, this car was babied and extremely clean before this accident the car was perfect to a T..... so my great loss is your gain.....


the car did NOT leak anything and the entire driveline minus the passenger axel is PERFECT and i can prove it.... i am looking to get rid of this thing ASAP so make me some offers......


Thanks again guys,


Brandon
Reply
Old Aug 12, 2006 | 08:52 PM
  #2  
92orange's Avatar
Member
 
Joined: May 2005
Posts: 122
Likes: 0
From: Bonner Springs, Ks
Car: 92 camaro z
Engine: 383
Transmission: 700r4
Axle/Gears: 4:11
Parts

What do you want for the panel that bolts to bottom of dash under steering column, and seats?
Thanks
Reply
Old Aug 12, 2006 | 08:59 PM
  #3  
91z28tpi355's Avatar
Junior Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 17
Likes: 0
How much do you want for the entire t-5 setup? Also, would you be willing to ship it?
Reply
Old Aug 14, 2006 | 08:32 AM
  #4  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
i would like 20 plus shipping for that piece

the t-5 id like $500, you take care of shipping...
Reply
Old Aug 14, 2006 | 08:36 AM
  #5  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
best offer on the seats....
Reply
Old Aug 14, 2006 | 08:48 AM
  #6  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
best offer on the seats....
Reply
Old Aug 14, 2006 | 09:05 AM
  #7  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08













Reply
Old Aug 14, 2006 | 09:38 AM
  #8  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
prist list, these prices are pretty firm but if you wanna make me an offer, go for it, im a reasonable guy....

Freshly painted black head light retainers (4 for $25)
Very Nice Front bumper cover with new emblem ($70)
Perfect (minimal fogging) front signal lights ($40)
Steering wheel + Bag $60
Dash pad cover, black plastic aftermarket covering ($70)
perfect 30th aniversary seats (f+r $350)
Perfect blue ground effects (front paint chipped a little ) (full set $200)
engine bay main wiring harness ($100)
complete w/ serp set-up and TBI 90k mile LO3 runs perfect ($500)
Complete Serp Set-up ($150)
complete t-5 set-up ($500 p/u only)
perfect non power doors ($120 each $200 set $275 with perfect door panels and arm rests) p/u only
brand new grey carpet ($70 + ship)
perfect fenders ($35 each) p/u only
perfect hood ($70) p/u only
nice 16" alum wheel w/ center cap and brand new tire (1 front, 1 back $70 each) p/u only
Gauge cluster works but the tach is pegged if anyone want it, ill let it go for like $20 bucks
perfect dash with vents and all ducting/wiring/vac lines/controls/evp/h/c ($200)
Center console with a crack in the back part (barely noticable W/ nice lid $70)
Very nice t-5 shifter plate/boot/**** (small crack), lettering on the shift pattern thing is still perfect, the leather boot has a few small cracks but in otherwise nice condition ($35)
Radio trim ($10)
97 camaro am/fm/cass stereo ($20)
gauge cluster trim ($10)
perfect Cig lighter essembly works great ($15)
defog switch ($5)
non-cruise control lever (nice lettering) ($10)
door sills no cracks ($25 for both)
un carpeted grey kick panels awesome cond ($10 each)


im all ears, make offers.....
Reply
Old Aug 14, 2006 | 01:06 PM
  #9  
pgslunchbox's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 24
Likes: 0
From: Fort Lee, VA
Car: '91 G92 Z28
Engine: TPI 355
Transmission: B/W 5 speed
Axle/Gears: 3.42
High pressure a/c line?
Reply
Old Aug 14, 2006 | 01:12 PM
  #10  
pgslunchbox's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 24
Likes: 0
From: Fort Lee, VA
Car: '91 G92 Z28
Engine: TPI 355
Transmission: B/W 5 speed
Axle/Gears: 3.42
"Window sweepers" on the out side how good are they?
Reply
Old Aug 14, 2006 | 09:42 PM
  #11  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
yea im not really trying to part out little stuff like this yet man, sorry im not trying to be ignorant or mean, id just like to get the doors sold as a solid piece, and the AC system sold as a whole as well.... thanks for the inquiry, i will get back to you if something changes.....


anyone else? i need to get this thing stripped soon, i will work with your budget, and reason with prices....
Reply
Old Aug 14, 2006 | 09:44 PM
  #12  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
ttt
Reply
Old Aug 14, 2006 | 10:20 PM
  #13  
pgslunchbox's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 24
Likes: 0
From: Fort Lee, VA
Car: '91 G92 Z28
Engine: TPI 355
Transmission: B/W 5 speed
Axle/Gears: 3.42
I hear ya. All is good.
Reply
Old Aug 15, 2006 | 08:34 AM
  #14  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
ttt
Reply
Old Aug 15, 2006 | 08:35 AM
  #15  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
bump
Reply
Old Aug 16, 2006 | 11:24 AM
  #16  
Diabolical's Avatar
Supreme Member
 
Joined: Jun 2001
Posts: 1,383
Likes: 0
From: CT
Car: 85 Trans Am WS6
Engine: 305HO L69
Transmission: T5
will you sell the t5 separate? my brothers car is already set up for a 5 speed, just need the transmission.
Reply
Old Aug 16, 2006 | 03:13 PM
  #17  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
what would your offer be for the trans alone? do you need the clutch as well? its a newer OEM replacement clutch....
Reply
Old Aug 16, 2006 | 05:25 PM
  #18  
Diabolical's Avatar
Supreme Member
 
Joined: Jun 2001
Posts: 1,383
Likes: 0
From: CT
Car: 85 Trans Am WS6
Engine: 305HO L69
Transmission: T5
it's for my brothers car, he just needs the tranny. he gave me $200 for a deal i had worked out , but the deal fell through. if you can let it go for $200, we got a deal, any more and i gotta talk to my brother first.
Reply
Old Aug 16, 2006 | 08:21 PM
  #19  
91thirdgen's Avatar
Junior Member
 
Joined: Aug 2006
Posts: 47
Likes: 0
how much for the tranny clutch, peddle assembly and belhousing
Reply
Old Aug 17, 2006 | 08:38 AM
  #20  
JerseyMark's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 647
Likes: 1
From: South Jersey
Car: 1991 RS Convertible
Engine: 96 LT1
Transmission: T5
Axle/Gears: 3.45 9-Bolt
How much do you want for the:

1-ECM
2-TBI
3-A/C Compressor

& im also interested in the "trans only" if the other guy doesnt take it.

Last edited by JerseyMark; Aug 17, 2006 at 08:42 AM.
Reply
Old Aug 18, 2006 | 10:36 AM
  #21  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
trans is basically sold....

ecm - auto tbi 305 $20
ecm - 5spd tbi 305 $30
a/c compressor $70
tbi $50
Reply
Old Aug 19, 2006 | 09:18 AM
  #22  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
dual fan lower bracket

need dual fan lower bracket. atcoracer@comcast.net or pm me, thanks
Reply
Old Aug 19, 2006 | 09:38 AM
  #23  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
front drivers fender

hi i will take the driver side fender. is it mint!. any rust or bondo? i work in hamilton. atcoracer@comcast.net
Reply
Old Aug 19, 2006 | 12:57 PM
  #24  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
fender is mint as is most of the car... it has a new coat of blue paint on it just the the rest of the car..
Reply
Old Aug 19, 2006 | 05:26 PM
  #25  
fg_stadium's Avatar
Member
 
Joined: Jun 2006
Posts: 116
Likes: 0
I'm in need of 28 spline axles,they have to be 5 on 4.50
Reply
Old Aug 20, 2006 | 09:33 AM
  #26  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
drivers fender

want to make arrangements to pick up fender. are u near trenton? send me a pm or email.atcoracer@comcast.net
Reply
Old Aug 20, 2006 | 08:54 PM
  #27  
horse_powr's Avatar
Junior Member
 
Joined: Dec 2005
Posts: 28
Likes: 0
Car: 83 camaro berlinetta
Engine: 305
Transmission: 700r4
how much for the front spoiler gfx
Reply
Old Aug 21, 2006 | 01:05 AM
  #28  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
doesnt have a daul fan set-up, one axel is snapped,
Reply
Old Aug 21, 2006 | 06:02 AM
  #29  
JerseyMark's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 647
Likes: 1
From: South Jersey
Car: 1991 RS Convertible
Engine: 96 LT1
Transmission: T5
Axle/Gears: 3.45 9-Bolt
"ecm - 5spd tbi 305 $30
a/c compressor $70
tbi $50"

I could do $125 for all three. Let me know if this works for you & we can arrange a pick-up date/time.
Reply
Old Aug 21, 2006 | 06:00 PM
  #30  
Mr_Metal's Avatar
Member
20 Year Member
 
Joined: Oct 2002
Posts: 229
Likes: 0
From: Cheyenne, WY
Car: '89 Camaro RS
Engine: LB8 V6 MFI
Transmission: T-5 5-speed
Axle/Gears: 3.42:1
I need the whole electric in-tank fuel pump assembly... all 4 steel hard lines, from the rubber connectors all the way to the end of the intank fuel pump assembly. If you can drop the tank, then it's an easy task.

There's also a way that you can cut an access panel under the rear hatch carpeting to get to the hard lines and fuel tank.

Do you want to do this ?
Reply
Old Aug 21, 2006 | 08:05 PM
  #31  
88BluBird's Avatar
Junior Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 56
Likes: 0
From: Bensalem PA
Car: 88 formula
Engine: 305 comming soon a 357
Transmission: automatic
carpet

how new is the carpet?
Reply
Old Aug 28, 2006 | 04:13 PM
  #32  
JerseyMark's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 647
Likes: 1
From: South Jersey
Car: 1991 RS Convertible
Engine: 96 LT1
Transmission: T5
Axle/Gears: 3.45 9-Bolt
Anyone heard from this guy?

I posted, PMed, & E-Mailed.... No Response.
Reply
Old Aug 28, 2006 | 07:00 PM
  #33  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
want to pick up door!!

brandon, i have been calling u for 3 days and your not answering your phone. want to pick up the door i paid for!!!!!call me or answer your phone
Reply
Old Aug 28, 2006 | 10:53 PM
  #34  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
come pick it up man, sorry i have busy lately ... no need to freet dude.... who stills want stuff?? im still around i just dont check this site often... please just email me at jeepsterxj@gmail.com and if you want to come pick up stuff just ask and ill meet you at the car...
Reply
Old Aug 29, 2006 | 07:21 PM
  #35  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
pick up door on wednesday.

hi brandon, im planning on coming to get the door on wednesday about 6.15 or so. i can take it off if u can,t. if a problem let me know. thanks, doug
Reply
Old Aug 30, 2006 | 12:11 AM
  #36  
95z28bill's Avatar
Junior Member
 
Joined: Apr 2006
Posts: 17
Likes: 0
Still have the GFX's how bout the hood and fenders?
Reply
Old Aug 30, 2006 | 01:05 PM
  #37  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
sold

fenders
doors
seats
brake rotors


pending


complete trans set-up
driveshaft
rear



please contact me asap about GFX, hood, Dash pad cover, belt drive accessories, computer, etc.... so we can set something up, sorry i havent been around much, college has me busy now, but im trying to plan my time wisely to help you guys out

thanks for everything

Brandon
Reply
Old Aug 31, 2006 | 10:20 AM
  #38  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
you got your door right? ill let you no about the starter
Reply
Old Aug 31, 2006 | 08:00 PM
  #39  
atcoracer's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 33
Likes: 0
From: levittown pa
Car: 69 rs 83z/28 92z/28 97 z/
parts

brandon, thanks for the good deal on the parts, lmk about the starter cause i will need one soon. thanks,doug
Reply
Old Sep 1, 2006 | 10:40 AM
  #40  
88 WS6 TransAm GTA's Avatar
Supreme Member
iTrader: (1)
 
Joined: Mar 2001
Posts: 2,181
Likes: 1
From: Cherry Hill, NJ
Car: 92 Trans Am 'Vert
Engine: 305 TPI
Transmission: 5 Speed
Hey man, my buddy is looking for a T5 setup. We can come pick it up too, were about 40 minutes away. If its not sold, send me a PM and we'll go from there!
Reply
Old Sep 1, 2006 | 04:01 PM
  #41  
DGROBELS's Avatar
Junior Member
 
Joined: May 2005
Posts: 12
Likes: 0
From: NEW JERSEY
Car: 1991 FORMULA
Engine: 305
Transmission: T5
bro i need an alternator bracket if it will work on my tpi? I live in hamilton

yoooo
i need an alternator bracket you still have one?

I live in hamilton near nottingham firehouse

doug
609-851-8928
Reply
Old Sep 1, 2006 | 08:06 PM
  #42  
Fastcamaro87's Avatar
Senior Member
 
Joined: Sep 2000
Posts: 741
Likes: 0
From: pgh,pa,
im interested in the carpet, how new is it? and could you get a shpping price to pittsburgh, PA 15207? I travel a lot, so picking it up may be an option also.
Reply
Old Sep 4, 2006 | 06:47 PM
  #43  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
ok well the carpet is practically new, i have someone thats supposed to come get it but if he doesnt, im trying to get like $50 for it since its very nice....


alt bracket make me an offer on
Reply
Old Sep 4, 2006 | 06:49 PM
  #44  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
i also have this SLP cat back for sale,

New Jersey F-Body Owners Association






Reply
Old Sep 4, 2006 | 06:50 PM
  #45  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
i also have this SLP cat back for sale,

New Jersey F-Body Owners Association


Reply
Old Sep 5, 2006 | 01:46 AM
  #46  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
ttt
Reply
Old Sep 5, 2006 | 01:46 AM
  #47  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
bump
Reply
Old Sep 5, 2006 | 01:48 AM
  #48  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
top
Reply
Old Sep 5, 2006 | 05:37 AM
  #49  
poopapooman's Avatar
On Probation
 
Joined: Apr 2006
Posts: 491
Likes: 0
From: Albany, NY
Car: 1992 Pontaic Firebird
Engine: 3.1L
Transmission: auto
Axle/Gears: 4 spd
does the rear deck lid have the holes to mount a high ris spoiler?
Reply
Old Sep 5, 2006 | 09:38 AM
  #50  
IceManRS305's Avatar
Thread Starter
Senior Member
iTrader: (-1)
 
Joined: Jan 2004
Posts: 776
Likes: 0
From: hamilton nj
Car: 91 Camaro RS
Engine: 350 bored .030 carbed
Transmission: t5
Axle/Gears: 3.08
what rear decklid? lol IT WAS HIT IN THE REAR
Reply



All times are GMT -5. The time now is 07:53 PM.