Tons of 3rd Gen performance parts- Greenville NC

Subscribe
Oct 29, 2006 | 05:47 PM
  #1  
SOLD-Centerline manufactured 17x8 front, 17x9.5 rear 2-pc aluminum wheels saw blade style with Nitto NT555 front 245/35ZR17 (95%) and NT555R Drag Radial 305/35R17 rears (95%). Retail for this set of wheel and tires is 2k+ I'm only asking $950 obo.

Borg-Warner T5 transmission freshened by Bob Brinkley Trans last year. Centerforce SFI competition flywheel, Centerforce Dual friction clutch set and B&M Pro ripper short throw shifter with a Sparco shift ****. All good and like new, asking $950 obo.

NOS Progressive Controller with one Cheater fuel solenoid and two Super Pro Shot solenoids (one for redundant) w/ wires and switch and NOS bottle blanket. New cost $650 asking $350 obo.

Front and rear 1LE 10.5 brakes. Front and rear are new OE calipers w/ red enamel coating, super stop pads and custom cross drilled rotors. Front will come with the new bearing and spindle assy. Asking $650 obo.

Lakewood rear lower trailing are set- $75 firm

Factory OE 1LE / IROC front and rear sway bay set with Energy Suspension eurathane bushing sets and link sets. Front bar is 1-3/8 and rear is 1 inch. Both have been basted and wrinkle finished. $250 obo

Front KYB GR-2 gas struts and KYB rear Gas-a-just shocks. $200 new, asking $125 firm all

Front OE K-member blasted and fully welded. (factory is only spot welded). Comes with lower control arms (a-arms) with Energy Suspension bushings and Moog h/d lower ball joint (spot welded in for safety). All is blasted and black enamel coated. $250 firm.

305 H/O Cylinder Heads w/ stamped roller tip rockers only have 7500-9500 miles on them. Asking $350

100 amp Delco polished alternator with chrome pulley and fan assy. Asking $85

Holley in tank H/P fuel pump assy. Asking $80

Have a set a Accel sawginaw fuel rail adapter that I will thrown in with any other purchase.

Will take offer on a buy everything deal.

Thanks,

Please feel free to contact me at nixbilt@peoplepc.com
or store32@colonytire.com or my mobile (252)717-0953.
Reply 0
Oct 30, 2006 | 09:24 AM
  #2  
Quote: Centerline manufactured 17x8 front, 17x9.5 rear 2-pc aluminum wheels saw blade style with Nitto NT555 front 245/35ZR17 (95%) and NT555R Drag Radial 305/35R17 rears (95%). Retail for this set of wheel and tires is 2k+ I'm only asking $950 obo.

Borg-Warner T5 transmission freshened by Bob Brinkley Trans last year. Centerforce SFI competition flywheel, Centerforce Dual friction clutch set and B&M Pro ripper short throw shifter with a Sparco shift ****. All good and like new, asking $950 obo.

NOS Progressive Controller with one Cheater fuel solenoid and two Super Pro Shot solenoids (one for redundant) w/ wires and switch. New cost $650 asking $350 obo.

Front and rear 1LE 10.5 brakes. Front and rear are new OE calipers w/ red enamel coating, super stop pads and custom cross drilled rotors. Front will come with the new bearing and spindle assy. Asking $650 obo.

Lakewood rear lower trailing are set- $75 firm

Factory OE 1LE / IROC front and rear sway bay set with Energy Suspension eurathane bushing sets and link sets. Front bar is 1-3/8 and rear is 1 inch. Both have been basted and wrinkle finished. $250 obo

Front KYB GR-2 gas struts and KYB rear Gas-a-just shocks. $200 new, asking $125 firm all

Front OE K-member blasted and fully welded. (factory is only spot welded). Comes with lower control arms (a-arms) with Energy Suspension bushings and Moog h/d lower ball joint (spot welded in for safety). All is blasted and black enamel coated. $250 firm.

305 H/O Cylinder Heads w/ stamped roller tip rockers only have 7500-9500 miles on them. Asking $350

100 amp Delco polished alternator with chrome pulley and fan assy. Asking $85

Holley in tank H/P fuel pump assy. Asking $80

Have a set a Accel sawginaw fuel rail adapter that I will thrown in with any other purchase.

Will take offer on a buy everything deal.

Thanks,

Please feel free to contact me at nixbilt@peoplepc.com
or store32@colonytire.com or my mobile (252)717-0953.


those lakewood lca's are like $75 new...?
Reply 0
Oct 30, 2006 | 10:48 AM
  #3  
Can I get pics of the brake set up .....and you said thats with the spindles?
Reply 0
Oct 30, 2006 | 02:05 PM
  #4  
Quote: those lakewood lca's are like $75 new...?
They are $89.90 through Jegs or Summit, but as I said this stuff is all new or like new off a show only car.

Tons of 3rd Gen performance parts- Greenville NC-iroc-sale-stuff-bmw  

Reply 0
Oct 30, 2006 | 02:09 PM
  #5  
Quote: Can I get pics of the brake set up .....and you said thats with the spindles?
Yes, should be with the spindles....Here are the pictures

Tons of 3rd Gen performance parts- Greenville NC-iroc-sale-stuff-bmw   Tons of 3rd Gen performance parts- Greenville NC-iroc-sale-stuff-bmw  

Reply 0
Oct 30, 2006 | 07:01 PM
  #6  
pics of rims and tires please.
Reply 0
Oct 30, 2006 | 07:07 PM
  #7  
Quote: They are $89.90 through Jegs or Summit, but as I said this stuff is all new or like new off a show only car.
well are the ones your selling new or used?
Reply 0
Oct 30, 2006 | 08:11 PM
  #8  
Quote: well are the ones your selling new or used?
They are on the car but they are in new condition. Hopefully this picture will help explain. This is an indoor, garage kept show car.

Reply 0
Oct 30, 2006 | 08:26 PM
  #9  
pic didnt show up, you got pics of rims?
Reply 0
Oct 30, 2006 | 08:30 PM
  #10  
Quote: pics of rims and tires please.
More if need.....Thanks

THESE RIMS ARE SOLD!

Tons of 3rd Gen performance parts- Greenville NC-iroc-picture-sale-010.jpg  

Reply 0
Oct 31, 2006 | 12:56 AM
  #11  
Hi, total price shipped to denver 80163? thanks. mike
Reply 0
Oct 31, 2006 | 08:49 PM
  #12  
Is the nitrous controller parts for TPI? What is part number?
Reply 0
Nov 1, 2006 | 06:47 PM
  #13  
Quote: Hi, total price shipped to denver 80163? thanks. mike
Sorry, not sure which item you inquiring about? Please let me know, Thanks
----------
Quote: Is the nitrous controller parts for TPI? What is part number?
NOS progressive controller is a universal item for any vehicle. The noids are for up to a 550 shot capability with one NOS noid as a redundant protector.

Let me know. THANKS
Reply 0
Nov 14, 2006 | 08:52 PM
  #14  
Do you still have the alternator for sale.
Reply 0
Nov 24, 2006 | 04:44 PM
  #15  
Quote: [SIZE=2]
Front and rear 1LE 10.5 brakes. Front and rear are new OE calipers w/ red enamel coating, super stop pads and custom cross drilled rotors. Front will come with the new bearing and spindle assy. Asking $650 obo.

[/FONT]
What will you ship brakes for to 98203 ?
Reply 0
Nov 25, 2006 | 08:01 AM
  #16  
Quote: What will you ship brakes for to 98203 ?
That is a lot of weight to ship, but I'm sure I can get it done w/ $725 for everything. I have a couple of double corrigated boxes at work that should do. Should have everything of the car by next weekend.
----------
Quote: Do you still have the alternator for sale.
Sorry no reply for so long, but yes I do still have the polished 100 amp alternator w/ chome fan and pulley for sale.
Reply 0
Nov 25, 2006 | 10:25 AM
  #17  
did you sell the lower control arms?

if not, im interested/

sheldon@twistedcrank.com
Reply 0
Nov 25, 2006 | 05:24 PM
  #18  
Quote: did you sell the lower control arms?

if not, im interested/

sheldon@twistedcrank.com
Still have them for sale. Let me know...
Reply 0
Nov 26, 2006 | 07:54 AM
  #19  
PMed you yesterday about the complete OE K-member.
Reply 0
Nov 26, 2006 | 10:12 AM
  #20  
Quote: PMed you yesterday about the complete OE K-member.
Rob? I think you ment to PM but emailed instead... I don't mind a meet thing, What place do you propose, and how much for delivery?

Thanks!
Reply 0
Nov 27, 2006 | 07:13 PM
  #21  
E-mailed you yesterday about pictures of this complete K-member, any pics yet?
Reply 0
Subscribe