SOLD!!!



I've gone to AFR 195 Eliminators and a MiniRam that I hope to install this weekend. The SuperRam is currently off my car.

Making one last ditch effort to sell it here before taking it to eBay. Wanted to see if anyone here was all that interested in it.

Includes:
- the lower intake manifold (not coated, not ported, no stripped holes - as shipped when I bought it new),
- ceramic coated runners,
- ceramic coated base with mild porting to the exits (rounded for better flow and gasket matching),
- top is black powder coated with the raised ribs polished
- polished fuel rails and Holley AFPR I've been using with it are included as well.

Does not include any throttle body.

AVAILABLE RIGHT NOW. Accept PayPal (you cover the 4% fee), nice easy way to handle things. Willing to ship, currently in Dallas, TX area.

I'm willing to split it up!

Here's the separated pricing:

SR Upper Kit:
- coated runners,
- coated base with mild porting to the exits (rounded for better flow and gasket matching),
- top is black powder coated with the raised ribs polished
- including the polished fuel rails (no injectors)
- includes the Holley AFPR mounted to the fuel rails
- chromed button head screws fo the plenum lid ($3 each x 17 of them)
- one complete and one partial gasket set
- does not include the throttle body
PRICE - $675 shipped to 48 states

Accel/Lingenfelter lower intake manifold. No porting, no coating, no bad or repaired bolt holes. Includes EGR block off plate.
PRICE - $275 shipped to 48 states

Will still consider trades for part of price.

Will discount price if buying complete set to $850 plus shipping.

This stuff is off the motor now and available for purchase and shipping. I prefer PayPal for payment. Prices include shipping.

Here's a recent pic of it while it was still installed, plus a link to several more pics of it since it was removed. I didn't clean the gaskets up on the runners so you could see the slight porting and clearances.

http://s34.photobucket.com/albums/d106/vernw/SR%20pics/

 

I would be interested in the base (intake manifold, not plenum base) if you're willing to split it up.

Tom

 

see top post....

 

how much??????

 

see top post...

 

700$

but i´ll guess it will be higher

 

see top post...

 

Looks like nice set up. Do you know is that a stock base or the matched unit. If tom whats the base I will take the top section. Let me know

 

The base is the Accel base made for the SuperRam, the one matched to the SR "kit".

Sounds like we may be onto something here. You two get together between yourselves and decide how you want to split it up and get back to me. How's that sound?

 

SR is coming off this weekend.....

 

SuperRam is coming off this weekend (tomorrow, actually)...

 

I may be int'd in the entire kit... I am checking on another option now...

Ryan

 

I do alot of porting.... I am interested in seeing the port quality of this.

 

Just let me know, Ryan.

PM me an email address and I'll try to get some pics to you on Sunday evening (busy doing the swap). You want installed pics, or disassembled?

 

I know you said you would like to sell the complete unit, and that is fine. If you decide you would be willing to sell the runners and plenum, I may be interested.

I am currently running ETEC 200's with a heavily ported vortec SD base and SLP runners. RPM climbes to about 5400 and croaks. Not many easy options that fit under the GTA hood, and strut bar. I would be interested in experimenting with a super ram for the right price.

 

What do you consider "the right price", Dave?

 

see top post....

 

Is the upper kit still available? What kind of ceramic coating is on it (like Jet Hot, or what)? Is it scratched up any (it's hard for me to tell in the picture). I'd like the extra pics you mentioned, please send to mlcrews@bellsouth.net.

Thanks,

Mike............

 

At this point it is all still available. If I don't sell it by this weekend I'll keep it until I decide to take it to eBay. Probably bring more there anyway LOL

I'll try to get you some good pix tomorrow afternoon in the daylight, Mike.

 

What kind of ceramic coating is on it (like Jet Hot, or what)? Any noticeable scratches? Is that a billet lid? How long has it been on the car? I saw the pictures prior to installation (looks awesome!!!!), how does it look now as compared to when you initally installed it? (I know, lots of questions...)

I'm VERY interested and a potential buyer at $675 shipped (+ the 3% paypal fee) for the "upper package" pending answers to above questions and if the additional/current pictures look good to me. Looking forward to the pics.

One last important question - Can you think of any reason(s) why this would not bolt to a SD Vortec Base (as that's what I have)? I believe that it should.

I won't be home from work until later tomorrow evening, but I will respond to you asap with my decision one way or the other after getting home and seeing the pics (by 10 pm at the latest).

Thanks for your time - Mike.....

 

Still a very interested buyer.....

I'm going out of town on business for a week and a half, leaving Sunday at noon. So, if I don't hear anything from you by then, I guess I'll just miss out on the opportunity to pick this stuff up (unless it's still for sale when I get back).

 

Sorry I didn't get back to ya sooner, been pretty tied up trying to get my 'Bird back together, plus working two jobs and trying to help out a sick wife (flu).

Anyway, I can't tell you whose coating it is, I bought them already coated. The lid is the standard SR lid, powder coated black and the flats polished. The flats have some light scratches, but nothing big or deep. I'll try to get you some pictures showing what I'm talking about on the lid later this evening. Hopefully while you're out of town you'll still be able to see this thread.....

And I see no reason it wouldn't work with any small block intake.

 

Here's some pix of the lid...

 

Since it's my fault for not getting back to ya before you left, I'll hold off on putting it up on eBay until I hear back from you. I'd rather see it go to someone I "knew" like on here anyway.

 

Still very interested, however I am not currently in the position where I can view the thread (my wife typed this in for me via the phone). I will actually be back in town Friday night and will view the pictures then. Thank you for holding off until I get back.

Thanks, Mike

 

No problem, talk to you friday night or Saturday

 

Hi,
I would be intersted in the chrome button head screws!
Thanks!

 

Sure. Cost ya $675 plus the PayPal fee, and I'll throw in a SR plenum, lid, and runners for free.


Or send me $3 times 17 screws plus $10 for shipping and my time/trouble and I'll go buy you a set of your own......

 

Vernw, where did you get the bolts at? I tried the two local hardware shopes around here, but they don't carry anything like that. These would make the perfect finishing touches for my superram.

 

WOW! That is definitely one highly polished and sharp looking SuperRam - KUDOS!!!!!!!!

I got them thru a local hardware chain here in the Dallas, TX area named "Elliot's Hardware".

Seriously - If you can't find them let me know and I can pick some up for you.

 

PM sent...

 

And one has been returned....

 

Still available, see top (initial) post for updates

 

No longer available, bot the upper and lower have been sold.....