Hey guys, I have a set of SLP 1 3/4 coated headers that I bought for my 92 Z28 that I need to sell. Included with the headers is the install kit and catalyst adapter. Im asking $800 for everything.

These headers have never been used. They are in the car but they have never been run. You can see this in the photos.

http://www.ironman24.carolinafbodycl...p-headers1.JPG

http://www.ironman24.carolinafbodycl...p-headers2.JPG

http://www.ironman24.carolinafbodycl...p-headers3.JPG

http://www.ironman24.carolinafbodycl...p-headers4.JPG

http://www.ironman24.carolinafbodycl...p-headers5.JPG


The complete list of parts consists of:

SLP 1 3/4 Coated Headers part number 30001C
Header Install Kit part number 30022
Catalyst adapter part number 30038

New, the headers go for 720.95, the install kit 92.65, and the catalyst adapter goes for 36.00 for grand total of 849.60.

As mentioned above, Im asking $800 for everything.

If interested feel free to reply to this posting or IM me here on the board. I live in Raliegh NC will be happy to deliver if you are in NC or the Rock Hill area of SC.

Eric

 

Will You go 700 for the headers and kit? I dont need the adapter.

 

FYI - Picture links don't work.....

 

Vern thanks for the heads up about the links. Try these.

http://www.ironman24.carolinafbodycl...p-headers1.JPG

http://www.ironman24.carolinafbodycl...p-headers2.JPG

http://www.ironman24.carolinafbodycl...p-headers3.JPG

http://www.ironman24.carolinafbodycl...p-headers4.JPG

http://www.ironman24.carolinafbodycl...p-headers5.JPG

 

rik, I cant do $700. Its all got to go so Im staying firm at $800.

Thanks for the interest though.

E

 

bump

 

Best of luck with the sale, Eric. I might be interested if there was some leeway in the price. I'm surprised that the install kit from SLP is now almost $100. You can easily gather the parts for it for less. The only tough part to source is the elbow fitting for the fan switch.

 

ahhh i see you cheated on the front bolt by the ps pump, its a beotch isn't it...

 

Eric - you have a PM....

 

Surely someone needs these or knows someone who does.

 

Bump to the top to keep it fresh

 

Jade you have a PM

 

Ok guys I really need to sell these so Im dropping the price to $750 for everything. HOWEVER if you are able to drive to the Raleigh/Durham area I will sell everthing for $700.

Again, these headers have never been used. They have been installed in the car but they have never been run (i.e. never been on the motor while the motor is running). Everything is brand new.


http://www.ironman24.carolinafbodycl...p-headers1.JPG

http://www.ironman24.carolinafbodycl...p-headers2.JPG

http://www.ironman24.carolinafbodycl...p-headers3.JPG

http://www.ironman24.carolinafbodycl...p-headers4.JPG

http://www.ironman24.carolinafbodycl...p-headers5.JPG

 

bump up to see the price reduction

 

if u still have them in a month or so i will be interested, would work great with my 383 build. are these for d port heads?

 

ssean92, Im sure they will work fine with D port heads but I do have to admit that I have physically check this out.

Also Im hoping that I dont have these in a month from now but if I do you might just get them.

E

 

links arent working for me.

 

http://www.ironman24.carolinafbodycl...p-headers1.JPG

http://www.ironman24.carolinafbodycl...p-headers2.JPG

http://www.ironman24.carolinafbodycl...p-headers3.JPG

http://www.ironman24.carolinafbodycl...p-headers4.JPG

http://www.ironman24.carolinafbodycl...p-headers5.JPG

 

You have to copy the URL off the address line at the top of the browser to paste in the links. Reason your's aren't working is the "..." part where some of the URL is cut out to shorten it up....

 

http://www.ironman24.carolinafbodycl...p-headers1.JPG

http://www.ironman24.carolinafbodycl...p-headers2.JPG

http://www.ironman24.carolinafbodycl...p-headers3.JPG

http://www.ironman24.carolinafbodycl...p-headers4.JPG

http://www.ironman24.carolinafbodycl...p-headers5.JPG


Vern, I did just that, copy the entire link from the webpage address however the Thirdgen BB cuts it down.

Eric

 

Could be, but this time the links are working....