CC306 and supporting valvetrain
Thread Starter
Senior Member
iTrader: (2)
Joined: Jan 2002
Posts: 925
Likes: 0
From: Kingsport, TN
Car: '92 RS, '84 Z28
Engine: 383, L69
Transmission: T56, 700R4
Axle/Gears: 3.42, 3.42
CC306 and supporting valvetrain
I have a cc306 230/244 .510/.540 112lsa new 255.95, I mocked it up in my 383 and it would clear my rods, so i took it out and boxed it up, has assembely lube on it.
Comp cams 986 springs 73.99
comp cams 747 10 degree retainers 61.99
comp cams 611 10 degree locks 22.99
parts total 414.xx all parts are new.
looking for 340 plus shipping. a cam is usualy 12 bucks and the springs i would say about the same. so 24 bucks for shipping
So hows 360 shipped
shoot me an email kevin_barger@hotmail.com or a pm as well
I go by bigkev37660 on ebay 100 percent feedback.
also have comp cams locators(about 40 bucks) for these springs dont remember part number add another 25 if you need them.
Comp cams 986 springs 73.99
comp cams 747 10 degree retainers 61.99
comp cams 611 10 degree locks 22.99
parts total 414.xx all parts are new.
looking for 340 plus shipping. a cam is usualy 12 bucks and the springs i would say about the same. so 24 bucks for shipping
So hows 360 shipped
shoot me an email kevin_barger@hotmail.com or a pm as well
I go by bigkev37660 on ebay 100 percent feedback.
also have comp cams locators(about 40 bucks) for these springs dont remember part number add another 25 if you need them.
Last edited by deepstage69; Feb 27, 2007 at 10:51 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
91TTOPZ
Exterior Parts for Sale
5
Sep 20, 2016 12:42 PM






