new member here so I cant post stuff 4sale yet
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
new member here so I cant post stuff 4sale yet
I have some parts forsale on another site called fastgm.com located in forsale/wanted section if anyone is looking for some stuff. I do have a HSR kit and some MSD stuff as well on there. All parts were taken off of a 91 camaro unless noted as new. I have some close up shots as well if needed. prices are on the fastgm site. I will do my best to keep viewing this thread but its new to me so I may not get to you as fast as the other site.
I also would like to add that I have a Demon 830 carb. that I had on the camaro a few years back before I went FI. This Carb. has approximately 500 miles on it and has the mechanical secondaries. this was the drag race model that was offered by Jegs when I purchased it. Looking for $400/BO for the demon. Thanks Joe
I also would like to add that I have a Demon 830 carb. that I had on the camaro a few years back before I went FI. This Carb. has approximately 500 miles on it and has the mechanical secondaries. this was the drag race model that was offered by Jegs when I purchased it. Looking for $400/BO for the demon. Thanks Joe
Last edited by joes01zq8; 06-29-2007 at 12:14 PM. Reason: adding items
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
would it be possible to get someone to move this to the classifieds? since i am new i dont have the previlage to post in there yet. thanks
#3
Member
Join Date: Apr 2007
Location: Oviedo,Fl
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro
Engine: 383
Transmission: th350
Axle/Gears: 4:10
Re: new member here so I cant post stuff 4sale yet
how much for the stud girdles and are those roller lifters?
#4
Junior Member
Join Date: Jan 2007
Location: Ocala, Florida
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: L98 TPI 5.7L
Transmission: Stock ... For now
Axle/Gears: Borg-Warner 9-Bolt
Re: new member here so I cant post stuff 4sale yet
how much for the intake/Manifold set?
#5
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
mightymouse: the (Dart)stud girdles are listed for a 100 bucks. Not sure what you are reffering to but I dont have any roller lifters forsale in those pics. I do have roller rockers though which are 7/16 Crane Golds that havent been installed on anything. Those are $250
Kamorov: I really want to keep the stealth ram set together. I think that it would be really hard to sell just the commander 950 as a stand alone item. I will let it go for $1300 with 19# inj. If you are just wanting the manifolds I believe that you can purchase that from summit for around $700 without anything else you will have to call them to verify this.
Kamorov: I really want to keep the stealth ram set together. I think that it would be really hard to sell just the commander 950 as a stand alone item. I will let it go for $1300 with 19# inj. If you are just wanting the manifolds I believe that you can purchase that from summit for around $700 without anything else you will have to call them to verify this.
Trending Topics
#8
Junior Member
Join Date: Jan 2007
Location: Ocala, Florida
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Pontiac Trans Am GTA
Engine: L98 TPI 5.7L
Transmission: Stock ... For now
Axle/Gears: Borg-Warner 9-Bolt
Re: new member here so I cant post stuff 4sale yet
Kamorov: I really want to keep the stealth ram set together. I think that it would be really hard to sell just the commander 950 as a stand alone item. I will let it go for $1300 with 19# inj. If you are just wanting the manifolds I believe that you can purchase that from summit for around $700 without anything else you will have to call them to verify this.
no, I meant it ALL MSD, Stealth Ram, EVERYTHING!
#9
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
Oh ok, well heres what I have:
HSR w/comm. 950 - $1300
Holley 58mm TB - $275
36# Injectors - $125
MSD Distributer - $150
MSD Blaster 2 coil - $20
MSD Digital 6 plus box - $250
Csr anodized thermostat housing - $50
= $2170 (I will let this stuff go 4 $2000 together)
I also have:
TPI air filter housing - $75
3rd gen dual el. fans - $75
i will let these 2 items go with the above items for $100
anything else that I need to list? I have individual pics of most everything if needed to email.
HSR w/comm. 950 - $1300
Holley 58mm TB - $275
36# Injectors - $125
MSD Distributer - $150
MSD Blaster 2 coil - $20
MSD Digital 6 plus box - $250
Csr anodized thermostat housing - $50
= $2170 (I will let this stuff go 4 $2000 together)
I also have:
TPI air filter housing - $75
3rd gen dual el. fans - $75
i will let these 2 items go with the above items for $100
anything else that I need to list? I have individual pics of most everything if needed to email.
#12
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
Bigseth: I am looking at getting $150 for the valve covers
tweek: I am located outside of charleston SC, you can have the fans for $75
Joe
tweek: I am located outside of charleston SC, you can have the fans for $75
Joe
#13
Junior Member
iTrader: (-1)
Join Date: Nov 2006
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 GMC Jimmy S15
Re: new member here so I cant post stuff 4sale yet
dam i need some fans but wasn't really looking to drive to SC to pick em up. Anyway they can be shipped and can I get a quote? Still interested.
#14
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
tweek: I have some realitives come into town for a few days. I will try to remember to get some info. on shipping hopefully on thursday.
#15
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
Finally...I can post in here, I still have this stuff forsale for now. If things go the way that I would like them to then all parts will be kept.....anyways TTT
#18
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
tweek I will ship the fans for 30 bucks if you still are going to want them. I had thought about using them on my truck but it may never happen.
mikieman I am looking for $25 plus 5 bucks to get them shipped to ya. these are not new and will require some type of adhesive to get them to stick. I would suggest using Goop. it works really well.
mikieman I am looking for $25 plus 5 bucks to get them shipped to ya. these are not new and will require some type of adhesive to get them to stick. I would suggest using Goop. it works really well.
#19
Junior Member
iTrader: (1)
Join Date: Jun 2006
Location: Canada
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro iroc-z
Engine: 350 4 brrl
Transmission: B&W T5
Axle/Gears: B&W 9 bolt 3.45
Re: new member here so I cant post stuff 4sale yet
I'll take em for $30 shipped. do you have paypal, what is paypal email.
#20
TGO Supporter
iTrader: (2)
Join Date: Feb 2000
Location: Avatar: My 34' 1989 Scarab III w/ twin 454's (502's Started!)
Posts: 1,235
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 Wellcraft Scarab III
Engine: Twin 454's
Axle/Gears: Twin Mercruiser Bravo I's
Re: new member here so I cant post stuff 4sale yet
Joe,
Thanks for the TPI airbox. Everything arrived today and is SUPERB. It was great doing business with you.
Thanks for the TPI airbox. Everything arrived today and is SUPERB. It was great doing business with you.
#22
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
sorry John this dist. is not the model that you were looking for. this is the mechanical adv. style, part # 85551 in the summit catalog.
I need to update my list since I have since purchased a boat am know using the ignition products. I am still thinking of selling the MSD digital box since I dont need the extra features compared to a MSD 5 or 6 box.
I need to update my list since I have since purchased a boat am know using the ignition products. I am still thinking of selling the MSD digital box since I dont need the extra features compared to a MSD 5 or 6 box.
#23
Member
iTrader: (3)
Join Date: Sep 2006
Location: Mass
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
I know you said earlier you wanted to keep the injection system together because the commander 950 might be hard to sell alone. I was wondering if you may consider selling the commander 950 alone and also what is the part number (I'm pretty sure I know which one it is but would like to make sure). Thanks
-Russ
-Russ
#25
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
I dont have a part # for you on the commander 950 but it is the same as the one found on summit online. part #hly-91504201
this is the one that doesnt have the wide band oxygen sensor. this kit was purchased before those expensive ones came out. I could possibly let the 950 & harness go without the plenums and other stuff. shoot me an offer and I will think about it.
bodie: I havent heard from tweek since the his last post. I was supposed to get him a qoute but I had forgotten about it due to family coming into town then. both fans were working when pulled.
this is the one that doesnt have the wide band oxygen sensor. this kit was purchased before those expensive ones came out. I could possibly let the 950 & harness go without the plenums and other stuff. shoot me an offer and I will think about it.
bodie: I havent heard from tweek since the his last post. I was supposed to get him a qoute but I had forgotten about it due to family coming into town then. both fans were working when pulled.
#28
Re: new member here so I cant post stuff 4sale yet
you have the commander setup still? very interested i posted yesterday in the wanted section for something like that...i just got and hsr myself how much you want?
#29
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
I still have the commander 950 and harness. Pmgm has been pm'n me about this and he has the first chance. you will be second. I havent heard from Pmgm since the other day.
pm me your offer and I'll let you know as soon as I can if it has been sold or not. I want to be as fair as possible but I also dont want to miss out on a sale.
thanks for your interest and good luck
pm me your offer and I'll let you know as soon as I can if it has been sold or not. I want to be as fair as possible but I also dont want to miss out on a sale.
thanks for your interest and good luck
#32
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Re: new member here so I cant post stuff 4sale yet
ttt....looks like the commander 950 is sold. waiting on payment.
I still have the HSR upper and lower plenums with Holley 58mm throttle body and adj. fuel regulator and both sets of injectors. Have the other parts as well.
I am looking for a set of Big Block Chevy roller rockers. I would like to trade my New Crane Gold 7/16 1.5 roller rockers for the big block ones if possible.
I still have the HSR upper and lower plenums with Holley 58mm throttle body and adj. fuel regulator and both sets of injectors. Have the other parts as well.
I am looking for a set of Big Block Chevy roller rockers. I would like to trade my New Crane Gold 7/16 1.5 roller rockers for the big block ones if possible.
Thread
Thread Starter
Forum
Replies
Last Post
Chuck84TA
Engine/Drivetrain/Suspension Parts for Sale
10
07-15-2016 09:05 PM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
0
08-05-2015 07:57 PM