600++ HP 454 BBC
05-14-2007, 08:18 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
600++ HP 454 BBC
600++ HP 454 BBC
This is a complete 454 motor that is ready for you to reassemble. Add a carb, wires, bearings and few gaskets and you're set to go 10s or better on pump gas.
It consists of the following:
-Gen VI 4 bolt main big block (standard bore)
-LS-6 pistons and pins
-Professionally resized 502 rods with ARP bolts
-Total Seal rings
-Isky roller cam (272-276@.050, 107lsa, 745-714 lift)
-Isky Red Zone lifters
-1.7 full roller rockers
-4" stroke crank
-World Merlin oval ports with a $1000 in a port and valve job (flow 335/250, 110cc chambers, 2.25/1.90 stainless steel valves, 7/16" studs and guide plates, Isky tool room springs and titanium retainers)
-Dart oval port single plane intake cnc ported for a 4150 carb
-Oil pan and new pump/pick up
Much more I probably forgot
I have a lot of pictures on my photobucket (don't want to kill your 56k with pics here!). Follow the link below...
---> ---> ---> http://s44.photobucket.com/albums/f11/SS86/454/
This is listed for a friend. If you have any questions you're best calling Jo, the owner, at 609-240-8546. Located in NJ. $3250 OBO! Thanks!
John
JohnNeville@Gmail.com
856 905 1908
This is a complete 454 motor that is ready for you to reassemble. Add a carb, wires, bearings and few gaskets and you're set to go 10s or better on pump gas.
It consists of the following:
-Gen VI 4 bolt main big block (standard bore)
-LS-6 pistons and pins
-Professionally resized 502 rods with ARP bolts
-Total Seal rings
-Isky roller cam (272-276@.050, 107lsa, 745-714 lift)
-Isky Red Zone lifters
-1.7 full roller rockers
-4" stroke crank
-World Merlin oval ports with a $1000 in a port and valve job (flow 335/250, 110cc chambers, 2.25/1.90 stainless steel valves, 7/16" studs and guide plates, Isky tool room springs and titanium retainers)
-Dart oval port single plane intake cnc ported for a 4150 carb
-Oil pan and new pump/pick up
Much more I probably forgot
I have a lot of pictures on my photobucket (don't want to kill your 56k with pics here!). Follow the link below...
---> ---> ---> http://s44.photobucket.com/albums/f11/SS86/454/
This is listed for a friend. If you have any questions you're best calling Jo, the owner, at 609-240-8546. Located in NJ. $3250 OBO! Thanks!
John
JohnNeville@Gmail.com
856 905 1908
05-14-2007, 09:47 PM
#2
Member
iTrader: (2)
Join Date: May 2005
Location: Palatine, IL
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 454 .030 over
Transmission: th-350
Axle/Gears: 9 bolt
Re: 600++ HP 454 BBC
wow, thats a deal, i got over 5 k into my set up and its not quite that nice
05-15-2007, 05:48 PM
#3
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
Re: 600++ HP 454 BBC
It really is a good deal. Helping Jo sell this so he can by what's left of my drag car project and get racing soon! Maybe you want 2 big blocks 
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
92rsvortec350
Engine/Drivetrain/Suspension Parts for Sale
19
10-09-2015 09:39 AM
Mongoose462ci
North East Region
0
09-16-2015 11:46 PM
