Project Part Out. Performance and Looks
Thread Starter
Member
iTrader: (13)
Joined: Feb 2006
Posts: 177
Likes: 0
From: Dexter MO
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Project Part Out. Performance and Looks
Well ive got afew things id like to sell. My project has went south and i have this stuff that i wont be needing.
1. Built 10bolt- 3.73 richmond gears, richmond powertrax locker, ta stud girdle, syn fluid, all new bearings, seals, welded axle tubes, new drum brakes and hardware. have receipts and pics. $400 prefer local pkup unless u arrange freight.
2. UMI lower control arms and panhard rod. Non-adj. NIB $150 plus shiping. Red
3. UMI bolt in lower control arm brackets. NIB $75 plus shipping Red
4. 4in lift off hardwood hood drilled for pins never painted still in black gel-coat. $175 plus freight. Will include new hood pin set.
5. Airbag setup for rear springs, dual bags and all hardware. NIB $60 plus shipping.
6. Spohn torque arm, and crossmember for TH350 swap w/ driveshaft loop. About 3000miles on it. $350 plus shipping.
7. Complete fuel system Aero pump, 20 ft of 8an and fittings, screw on filter base with filter. NIB. $300 plus shipping.
If intersted in any of this stuff send me a PM. Im sure there is more. Or u can call me at (573) 421-3467 could work out something on delivery if ur not to far. Thanks
Eric
1. Built 10bolt- 3.73 richmond gears, richmond powertrax locker, ta stud girdle, syn fluid, all new bearings, seals, welded axle tubes, new drum brakes and hardware. have receipts and pics. $400 prefer local pkup unless u arrange freight.
2. UMI lower control arms and panhard rod. Non-adj. NIB $150 plus shiping. Red
3. UMI bolt in lower control arm brackets. NIB $75 plus shipping Red
4. 4in lift off hardwood hood drilled for pins never painted still in black gel-coat. $175 plus freight. Will include new hood pin set.
5. Airbag setup for rear springs, dual bags and all hardware. NIB $60 plus shipping.
6. Spohn torque arm, and crossmember for TH350 swap w/ driveshaft loop. About 3000miles on it. $350 plus shipping.
7. Complete fuel system Aero pump, 20 ft of 8an and fittings, screw on filter base with filter. NIB. $300 plus shipping.
If intersted in any of this stuff send me a PM. Im sure there is more. Or u can call me at (573) 421-3467 could work out something on delivery if ur not to far. Thanks
Eric
Supreme Member
iTrader: (3)
Joined: Feb 2006
Posts: 1,093
Likes: 0
From: western ny
Car: '82 formula clone, 95 saab 900se
Engine: 350 vortec'd tbi, 2.0L turbo
Transmission: 700r4, 5 spd
Axle/Gears: 10 bolt 2.77 open
Re: Project Part Out. Performance and Looks
lol it's harwood not hardwood
Trending Topics
Supreme Member
iTrader: (3)
Joined: Feb 2006
Posts: 1,093
Likes: 0
From: western ny
Car: '82 formula clone, 95 saab 900se
Engine: 350 vortec'd tbi, 2.0L turbo
Transmission: 700r4, 5 spd
Axle/Gears: 10 bolt 2.77 open
Re: Project Part Out. Performance and Looks
sorry just had to point it out, bump for the sale
Joined: Jun 2004
Posts: 326
Likes: 13
From: jacksonville, fl
Car: 1988 firebird
Engine: 305 tpi
Transmission: 95 T56
Axle/Gears: stock 10 built, yukon diff, 4.10
Re: Project Part Out. Performance and Looks
im interested in the lca's and the panhard bar. how much would the shipping be to 32216?
Junior Member
Joined: Jun 2005
Posts: 44
Likes: 0
From: KC METRO
Car: 1984 Z28
Engine: 355
Transmission: T5
Re: Project Part Out. Performance and Looks
How much use on the 10 bolt? How did you like the Powertrax? 26 or 28 spline? New axles? Thanks for your time.
Senior Member
Joined: Jan 2005
Posts: 782
Likes: 0
From: Port Angeles, Wa
Car: 1983 Camaro Z28
Engine: 584
Transmission: TSI Glide
Axle/Gears: Quick performance 9 inch
Re: Project Part Out. Performance and Looks
What kind of things are you looking to trade? interested in the Spohn torque arm
Joined: Jun 2004
Posts: 326
Likes: 13
From: jacksonville, fl
Car: 1988 firebird
Engine: 305 tpi
Transmission: 95 T56
Axle/Gears: stock 10 built, yukon diff, 4.10
Re: Project Part Out. Performance and Looks
how much for shipping on the lower control arms and panhard bars to 32216?
Senior Member
Joined: May 2006
Posts: 529
Likes: 0
From: Bartlesville, OK
Car: 2011 Cummins HO
Engine: 350 HSR
Transmission: T-56
Axle/Gears: 3.43
Member
Joined: Aug 2005
Posts: 119
Likes: 0
From: PA
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
Re: Project Part Out. Performance and Looks
whats the deal with the air bags, why so cheap?
Thread Starter
Member
iTrader: (13)
Joined: Feb 2006
Posts: 177
Likes: 0
From: Dexter MO
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Re: Project Part Out. Performance and Looks
Come on guys make me some offers on the stuff. May accept trades just let me know what u have. THANKS
Thread Starter
Member
iTrader: (13)
Joined: Feb 2006
Posts: 177
Likes: 0
From: Dexter MO
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Re: Project Part Out. Performance and Looks
No thanks that is to cheap these are bnib. I paid 170 plus shipping. which was around $25.
Thread Starter
Member
iTrader: (13)
Joined: Feb 2006
Posts: 177
Likes: 0
From: Dexter MO
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Re: Project Part Out. Performance and Looks
bump
Last edited by wrenchman1213; Nov 8, 2007 at 10:13 AM.
Junior Member
Joined: Sep 2006
Posts: 10
Likes: 0
Senior Member
iTrader: (2)
Joined: Jul 2002
Posts: 784
Likes: 1
From: Philly, PA
Car: 1986 Camaro SC
Engine: None
Transmission: None
Axle/Gears: Moser 9" W/ spool 3.50 gears
Re: Project Part Out. Performance and Looks
IS the fuel system for carb or FI?
Please send me all the info and Pics would be helpful.
Outstunn1@aol.com
Please send me all the info and Pics would be helpful.
Outstunn1@aol.com
Supreme Member
iTrader: (7)
Joined: Jan 2006
Posts: 1,160
Likes: 1
From: Santa Rosa, Cali
Car: 1988 IROC 5.7 Money Pit
Engine: (being built; modified TPI ZZ4
Transmission: 2200 stall/ stage 3 700R4
Axle/Gears: freshened 3.27 in 9.bolt/
Re: Project Part Out. Performance and Looks
Is the fuel pump set up EFI???? Nitro
Thread Starter
Member
iTrader: (13)
Joined: Feb 2006
Posts: 177
Likes: 0
From: Dexter MO
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Re: Project Part Out. Performance and Looks
Everything is gone. Traded locally thanks for all the interest.
Last edited by wrenchman1213; Nov 25, 2007 at 07:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
